Nix User's Guide

Eelco Dolstra

LogicBlox

Table of Contents

1. Introduction
1.1. About Nix
1.2. About us
1.3. About this manual
1.4. License
1.5. More information
2. Quick Start
3. Installation
3.1. Supported platforms
3.2. Obtaining Nix
3.3. Prerequisites
3.4. Building Nix from source
3.5. Installing a binary distribution
3.6. Security
3.6.1. Single-user mode
3.6.2. Multi-user mode
3.6.2.1. Setting up the build users
3.6.2.2. Nix store/database owned by root
3.6.2.3. Nix store/database not owned by root
3.6.2.4. Restricting access
3.7. Using Nix
4. Package Management
4.1. Basic package management
4.2. Profiles
4.3. Garbage collection
4.3.1. Garbage collector roots
4.4. Channels
4.5. One-click installs
4.6. Sharing packages between machines
5. Writing Nix Expressions
5.1. A simple Nix expression
5.1.1. The Nix expression
5.1.2. The builder
5.1.3. Composition
5.1.4. Testing
5.1.5. The generic builder
5.2. The Nix expression language
5.2.1. Values
5.2.2. Language constructs
5.2.3. Operators
5.2.4. Derivations
5.2.4.1. Advanced attributes
5.2.5. Built-in functions
5.3. The standard environment
5.3.1. Customising the generic builder
5.3.2. Debugging failed builds
6. Setting Up Distributed Builds
A. Command Reference
A.1. Common options
A.2. Common environment variables
A.3. Nix configuration file
A.4. Main commands
nix-env — manipulate or query Nix user environments
nix-instantiate — instantiate store derivations from Nix expressions
nix-store — manipulate or query the Nix store
A.5. Utilities
nix-build — build a Nix expression
nix-channel — manage Nix channels
nix-collect-garbage — delete unreachable store paths
nix-copy-closure — copy a closure to or from a remote machine via SSH
nix-hash — compute the cryptographic hash of a path
nix-install-package — install a Nix Package file
nix-prefetch-url — copy a file from a URL into the store and print its hash
nix-pull — pull substitutes from a network cache
nix-push — push store paths onto a network cache
nix-worker — Nix multi-user support daemon
B. Troubleshooting
B.1. Collisions in nix-env
B.2. Too many links error in the Nix store
C. Glossary
D. Nix Release Notes
D.1. Release 1.0 (May 11, 2012)
D.2. Release 0.16 (August 17, 2010)
D.3. Release 0.15 (March 17, 2010)
D.4. Release 0.14 (February 4, 2010)
D.5. Release 0.13 (November 5, 2009)
D.6. Release 0.12 (November 20, 2008)
D.7. Release 0.11 (December 31, 2007)
D.8. Release 0.10.1 (October 11, 2006)
D.9. Release 0.10 (October 6, 2006)
D.10. Release 0.9.2 (September 21, 2005)
D.11. Release 0.9.1 (September 20, 2005)
D.12. Release 0.9 (September 16, 2005)
D.13. Release 0.8.1 (April 13, 2005)
D.14. Release 0.8 (April 11, 2005)
D.15. Release 0.7 (January 12, 2005)
D.16. Release 0.6 (November 14, 2004)
D.17. Release 0.5 and earlier

List of Figures

4.1. User environments

List of Tables

5.1. Operators

List of Examples

5.1. Nix expression for GNU Hello (default.nix)
5.2. Build script for GNU Hello (builder.sh)
5.3. Composing GNU Hello (all-packages.nix)
5.4. Build script using the generic build functions
5.5. Nix expression for Subversion
5.6. Passing information to a builder using toXML
5.7. XML representation produced by toXML
6.1. Remote machine configuration: remote-systems.conf
A.1. Nix configuration file

Chapter 1. Introduction

1.1. About Nix

Nix is a purely functional package manager. This means that it treats packages like values in purely functional programming languages such as Haskell — they are built by functions that don’t have side-effects, and they never change after they have been built. Nix stores packages in the Nix store, usually the directory /nix/store, where each package has its own unique subdirectory such as

/nix/store/nlc4z5y1hm8w9s8vm6m1f5hy962xjmp5-firefox-12.0

where nlc4z5… is a unique identifier for the package that captures all its dependencies (it’s a cryptographic hash of the package’s build dependency graph). This enables many powerful features.

Multiple versions

You can have multiple versions or variants of a package installed at the same time. This is especially important when different applications have dependencies on different versions of the same package — it prevents the “DLL hell”. Because of the hashing scheme, different versions of a package end up in different paths in the Nix store, so they don’t interfere with each other.

An important consequence is that operations like upgrading or uninstalling an application cannot break other applications, since these operations never “destructively” update or delete files that are used by other packages.

Complete dependencies

Nix helps you make sure that package dependency specifications are complete. In general, when you’re making a package for a package management system like RPM, you have to specify for each package what its dependencies are, but there are no guarantees that this specification is complete. If you forget a dependency, then the package will build and work correctly on your machine if you have the dependency installed, but not on the end user's machine if it's not there.

Since Nix on the other hand doesn’t install packages in “global” locations like /usr/bin but in package-specific directories, the risk of incomplete dependencies is greatly reduced. This is because tools such as compilers don’t search in per-packages directories such as /nix/store/5lbfaxb722zp…-openssl-0.9.8d/include, so if a package builds correctly on your system, this is because you specified the dependency explicitly.

Runtime dependencies are found by scanning binaries for the hash parts of Nix store paths (such as r8vvq9kq…). This sounds risky, but it works extremely well.

Multi-user support

Nix has multi-user support. This means that non-privileged users can securely install software. Each user can have a different profile, a set of packages in the Nix store that appear in the user’s PATH. If a user installs a package that another user has already installed previously, the package won’t be built or downloaded a second time. At the same time, it is not possible for one user to inject a Trojan horse into a package that might be used by another user.

Atomic upgrades and rollbacks

Since package management operations never overwrite packages in the Nix store but just add new versions in different paths, they are atomic. So during a package upgrade, there is no time window in which the package has some files from the old version and some files from the new version — which would be bad because a program might well crash if it’s started during that period.

And since package aren’t overwritten, the old versions are still there after an upgrade. This means that you can roll back to the old version:

$ nix-env --upgrade some-packages
$ nix-env --rollback

Garbage collection

When you uninstall a package like this…

$ nix-env --uninstall firefox

the package isn’t deleted from the system right away (after all, you might want to do a rollback, or it might be in the profiles of other users). Instead, unused packages can be deleted safely by running the garbage collector:

$ nix-collect-garbage

This deletes all packages that aren’t in use by any user profile or by a currently running program.

Functional package language

Packages are built from Nix expressions, which is a simple functional language. A Nix expression describes everything that goes into a package build action (a “derivation”): other packages, sources, the build script, environment variables for the build script, etc. Nix tries very hard to ensure that Nix expressions are deterministic: building a Nix expression twice should yield the same result.

Because it’s a functional language, it’s easy to support building variants of a package: turn the Nix expression into a function and call it any number of times with the appropriate arguments. Due to the hashing scheme, variants don’t conflict with each other in the Nix store.

Transparent source/binary deployment

Nix expressions generally describe how to build a package from source, so an installation action like

$ nix-env --install firefox

could cause quite a bit of build activity, as not only Firefox but also all its dependencies (all the way up to the C library and the compiler) would have to built, at least if they are not already in the Nix store. This is a source deployment model. For most users, building from source is not very pleasant as it takes far too long. However, Nix can automatically skip building from source and download a pre-built binary instead if it knows about it. Nix channels provide Nix expressions along with pre-built binaries.

Binary patching

In addition to downloading binaries automatically if they’re available, Nix can download binary deltas that patch an existing package in the Nix store into a new version. This speeds up upgrades.

Nix Packages collection

We provide a large set of Nix expressions containing hundreds of existing Unix packages, the Nix Packages collection (Nixpkgs).

Service deployment

Nix can be used not only for rolling out packages, but also complete configurations of services. This is done by treating all the static bits of a service (such as software packages, configuration files, control scripts, static web pages, etc.) as “packages” that can be built by Nix expressions. As a result, all the features above apply to services as well: for instance, you can roll back a web server configuration if a configuration change turns out to be undesirable, you can easily have multiple instances of a service (e.g., a test and production server), and because the whole service is built in a purely functional way from a Nix expression, it is repeatable so you can easily reproduce the service on another machine.

Portability

Nix should run on most Unix systems, including Linux, FreeBSD and Mac OS X. It is also supported on Windows using Cygwin.

NixOS

NixOS is a Linux distribution based on Nix. It uses Nix not just for package management but also to manage the system configuration (e.g., to build configuration files in /etc). This means, among other things, that it’s possible to easily roll back the entire configuration of the system to an earlier state. Also, users can install software without root privileges. For more information and downloads, see the NixOS homepage.

1.2. About us

Nix was originally developed at the Department of Information and Computing Sciences, Utrecht University by the TraCE project (2003-2008). The project was funded by the Software Engineering Research Program Jacquard to improve the support for variability in software systems. Further funding was provided by the NIRICT LaQuSo Build Farm project. Development is currently supported by LogicBlox.

1.3. About this manual

This manual tells you how to install and use Nix and how to write Nix expressions for software not already in the Nix Packages collection. It also discusses some advanced topics, such as setting up distributed multi-platform building.

1.4. License

Nix is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. Nix is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.

1.5. More information

Some background information on Nix can be found in a number of papers. The ICSE 2004 paper Imposing a Memory Management Discipline on Software Deployment discusses the hashing mechanism used to ensure reliable dependency identification and non-interference between different versions and variants of packages. The LISA 2004 paper Nix: A Safe and Policy-Free System for Software Deployment gives a more general discussion of Nix from a system-administration perspective. The CBSE 2005 paper Efficient Upgrading in a Purely Functional Component Deployment Model is about transparent patch deployment in Nix. The SCM-12 paper Service Configuration Management shows how services (e.g., web servers) can be deployed and managed through Nix. An overview of NixOS is given in the JFP article NixOS: A Purely Functional Linux Distribution. The Nix homepage has an up-to-date list of Nix-related papers.

Nix is the subject of Eelco Dolstra’s PhD thesis The Purely Functional Software Deployment Model, which contains most of the papers listed above.

Nix has a homepage at http://nixos.org/.

Chapter 2. Quick Start

This chapter is for impatient people who don't like reading documentation. For more in-depth information you are kindly referred to the following chapters.

  1. Download a source tarball or RPM or Debian/Ubuntu package from http://nixos.org/. Build source distributions using the regular sequence:

    $ tar xvfj nix-version.tar.bz2
    $ ./configure
    $ make
    $ make install (as root)

    This will install the Nix binaries in /usr/local and keep the Nix store and other state in /nix. You can change the former by specifying --prefix=path. The location of the store can be changed using --with-store-dir=path. However, you shouldn't change the store location, if at all possible, since that will make it impossible to use pre-built binaries from the Nixpkgs channel and other channels. The location of the state can be changed using --localstatedir=path.

  2. You should add prefix/etc/profile.d/nix.sh to your ~/.bashrc (or some other login file).

  3. Subscribe to the Nix Packages channel.

    $ nix-channel --add http://nixos.org/releases/nixpkgs/channels/nixpkgs-unstable

  4. Download the latest Nix expressions available in the channel.

    $ nix-channel --update

    Note that this in itself doesn't download any packages, it just downloads the Nix expressions that build them and stores them somewhere (under ~/.nix-defexpr, in case you're curious). Also, it registers the fact that pre-built binaries are available remotely.

  5. See what installable packages are currently available in the channel:

    $ nix-env -qa \*
    docbook-xml-4.2
    firefox-1.0pre-PR-0.10.1
    hello-2.1.1
    libxslt-1.1.0
    ...

  6. Install some packages from the channel:

    $ nix-env -i hello firefox ... 

    This should download pre-built packages; it should not build them locally (if it does, something went wrong).

  7. Test that they work:

    $ which hello
    /home/eelco/.nix-profile/bin/hello
    $ hello
    Hello, world!
    $ firefox
    (read Slashdot or something)

  8. Uninstall a package:

    $ nix-env -e hello

  9. To keep up-to-date with the channel, do:

    $ nix-channel --update
    $ nix-env -u '*'

    The latter command will upgrade each installed package for which there is a “newer” version (as determined by comparing the version numbers).

  10. You can also install specific packages directly from your web browser. For instance, you can go to http://hydra.nixos.org/jobset/nixpkgs/trunk/channel/latest and click on any link for the individual packages for your platform. Associate application/nix-package with the program nix-install-package. A window should appear asking you whether it’s okay to install the package. Say Y. The package and all its dependencies will be installed.

  11. If you're unhappy with the result of a nix-env action (e.g., an upgraded package turned out not to work properly), you can go back:

    $ nix-env --rollback

  12. You should periodically run the Nix garbage collector to get rid of unused packages, since uninstalls or upgrades don't actually delete them:

    $ nix-collect-garbage -d

Chapter 3. Installation

3.1. Supported platforms

Nix is currently supported on the following platforms:

  • Linux (particularly on x86, x86_64, and PowerPC).

  • Mac OS X.

  • FreeBSD (only tested on Intel).

Nix is pretty portable, so it should work on most other Unix platforms as well.

3.2. Obtaining Nix

The easiest way to obtain Nix is to download a source distribution. RPMs for Red Hat, SuSE, and Fedora Core are also available.

Alternatively, the most recent sources of Nix can be obtained from its Git repository. For example, the following command will check out the latest revision into a directory called nix:

$ git clone https://github.com/NixOS/nix

Likewise, specific releases can be obtained from the tags of the repository.

3.3. Prerequisites

The following prerequisites only apply when you build from source. Binary releases (e.g., RPMs) have no prerequisites.

A fairly recent version of GCC/G++ is required. Version 2.95 and higher should work. Clang will also work.

Nix requires Perl, version 5.8 or higher.

Nix requires pkg-config to locate its dependencies. If your distribution does not provide it, you can get it from http://www.freedesktop.org/wiki/Software/pkg-config.

Nix requires the bzip2 compressor program and the libbz2 library. Thus you must have bzip2 installed, including development headers and libraries. If your distribution does not provide these, you can obtain bzip2 from http://www.bzip.org/.

Nix requires the SQLite embedded database library, version 3.6.19 or higher. If your distribution does not provide it, please install it from http://www.sqlite.org/.

Nix requires the Perl DBI and DBD::SQLite libraries, which are available from CPAN if your distribution does not provide them.

Nix can optionally use the Boehm garbage collector to reduce the evaluator’s memory consumption. To enable it, install pkgconfig and the Boehm garbage collector, and pass the flag --enable-gc to configure.

To build this manual and the man-pages you need the xmllint and xsltproc programs, which are part of the libxml2 and libxslt packages, respectively. You also need the DocBook XSL stylesheets and optionally the DocBook 5.0 RELAX NG schemas. Note that these are only required if you modify the manual sources or when you are building from the Git repository.

To build the parser, very recent versions of Bison and Flex are required. (This is because Nix needs GLR support in Bison and reentrancy support in Flex.) For Bison, you need version 2.3 or higher (1.875 does not work), which can be obtained from the GNU FTP server. For Flex, you need version 2.5.33, which is available on SourceForge. Slightly older versions may also work, but ancient versions like the ubiquitous 2.5.4a won't. Note that these are only required if you modify the parser or when you are building from the Git repository.

3.4. Building Nix from source

After unpacking or checking out the Nix sources, issue the following commands:

$ ./configure options...
$ make
$ make install

When building from the Git repository, these should be preceded by the command:

$ ./bootstrap.sh

The installation path can be specified by passing the --prefix=prefix to configure. The default installation directory is /usr/local. You can change this to any location you like. You must have write permission to the prefix path.

Nix keeps its store (the place where packages are stored) in /nix/store by default. This can be changed using --with-store-dir=path.

Warning

It is best not to change the Nix store from its default, since doing so makes it impossible to use pre-built binaries from the standard Nixpkgs channels — that is, all packages will need to be built from source.

Nix keeps state (such as its database and log files) in /nix/var by default. This can be changed using --localstatedir=path.

If you want to rebuild the documentation, pass the full path to the DocBook RELAX NG schemas and to the DocBook XSL stylesheets using the --with-docbook-rng=path and --with-docbook-xsl=path options.

3.5. Installing a binary distribution

RPM and Deb packages of Nix for a number of different versions of Fedora, openSUSE, Debian and Ubuntu can be downloaded from http://nixos.org/. Once downloaded, the RPMs can be installed or upgraded using rpm -U. For example,

$ rpm -U nix-0.13pre18104-1.i386.rpm

Likewise, for a Deb package:

$ dpkg -i nix_0.13pre18104-1_amd64.deb

Nix can be uninstalled using rpm -e nix or dpkg -r nix. After this you should manually remove the Nix store and other auxiliary data, if desired:

$ rm -rf /nix/store
$ rm -rf /nix/var

3.6. Security

Nix has two basic security models. First, it can be used in “single-user mode”, which is similar to what most other package management tools do: there is a single user (typically root) who performs all package management operations. All other users can then use the installed packages, but they cannot perform package management operations themselves.

Alternatively, you can configure Nix in “multi-user mode”. In this model, all users can perform package management operations — for instance, every user can install software without requiring root privileges. Nix ensures that this is secure. For instance, it’s not possible for one user to overwrite a package used by another user with a Trojan horse.

3.6.1. Single-user mode

In single-user mode, all Nix operations that access the database in prefix/var/nix/db or modify the Nix store in prefix/store must be performed under the user ID that owns those directories. This is typically root. (If you install from RPM packages, that’s in fact the default ownership.) However, on single-user machines, it is often convenient to chown those directories to your normal user account so that you don’t have to su to root all the time.

3.6.2. Multi-user mode

To allow a Nix store to be shared safely among multiple users, it is important that users are not able to run builders that modify the Nix store or database in arbitrary ways, or that interfere with builds started by other users. If they could do so, they could install a Trojan horse in some package and compromise the accounts of other users.

To prevent this, the Nix store and database are owned by some privileged user (usually root) and builders are executed under special user accounts (usually named nixbld1, nixbld2, etc.). When a unprivileged user runs a Nix command, actions that operate on the Nix store (such as builds) are forwarded to a Nix daemon running under the owner of the Nix store/database that performs the operation.

Note

Multi-user mode has one important limitation: only root can run nix-pull to register the availability of pre-built binaries. However, those registrations are shared by all users, so they still get the benefit from nix-pulls done by root.

3.6.2.1. Setting up the build users

The build users are the special UIDs under which builds are performed. They should all be members of the build users group (usually called nixbld). This group should have no other members. The build users should not be members of any other group.

Here is a typical /etc/group definition of the build users group with 10 build users:

nixbld:!:30000:nixbld1,nixbld2,nixbld3,nixbld4,nixbld5,nixbld6,nixbld7,nixbld8,nixbld9,nixbld10

In this example the nixbld group has UID 30000, but of course it can be anything that doesn’t collide with an existing group.

Here is the corresponding part of /etc/passwd:

nixbld1:x:30001:65534:Nix build user 1:/var/empty:/noshell
nixbld2:x:30002:65534:Nix build user 2:/var/empty:/noshell
nixbld3:x:30003:65534:Nix build user 3:/var/empty:/noshell
...
nixbld10:x:30010:65534:Nix build user 10:/var/empty:/noshell

The home directory of the build users should not exist or should be an empty directory to which they do not have write access.

The build users should have write access to the Nix store, but they should not have the right to delete files. Thus the Nix store’s group should be the build users group, and it should have the sticky bit turned on (like /tmp):

$ chgrp nixbld /nix/store
$ chmod 1775 /nix/store

Finally, you should tell Nix to use the build users by specifying the build users group in the build-users-group option in the Nix configuration file (usually /etc/nix/nix.conf):

build-users-group = nixbld

3.6.2.2. Nix store/database owned by root

The simplest setup is to let root own the Nix store and database. I.e.,

$ chown -R root /nix/store /nix/var/nix

The Nix daemon should be started as follows (as root):

$ nix-worker --daemon

You’ll want to put that line somewhere in your system’s boot scripts.

To let unprivileged users use the daemon, they should set the NIX_REMOTE environment variable to daemon. So you should put a line like

export NIX_REMOTE=daemon

into the users’ login scripts.

3.6.2.3. Nix store/database not owned by root

It is also possible to let the Nix store and database be owned by a non-root user, which should be more secure[1]. Typically, this user is a special account called nix, but it can be named anything. It should own the Nix store and database:

$ chown -R nix /nix/store /nix/var/nix

and of course nix-worker --daemon should be started under that user, e.g.,

$ su - nix -c "exec /nix/bin/nix-worker --daemon"

There is a catch, though: non-root users cannot start builds under the build user accounts, since the setuid system call is obviously privileged. To allow a non-root Nix daemon to use the build user feature, it calls a setuid-root helper program, nix-setuid-helper. This program is installed in prefix/libexec/nix-setuid-helper. To set the permissions properly (Nix’s make install doesn’t do this, since we don’t want to ship setuid-root programs out-of-the-box):

$ chown root.root /nix/libexec/nix-setuid-helper
$ chmod 4755 /nix/libexec/nix-setuid-helper

(This example assumes that the Nix binaries are installed in /nix.)

Of course, the nix-setuid-helper command should not be usable by just anybody, since then anybody could run commands under the Nix build user accounts. For that reason there is a configuration file /etc/nix-setuid.conf that restricts the use of the helper. This file should be a text file containing precisely two lines, the first being the Nix daemon user and the second being the build users group, e.g.,

nix
nixbld

The setuid-helper barfs if it is called by a user other than the one specified on the first line, or if it is asked to execute a build under a user who is not a member of the group specified on the second line. The file /etc/nix-setuid.conf must be owned by root, and must not be group- or world-writable. The setuid-helper barfs if this is not the case.

3.6.2.4. Restricting access

To limit which users can perform Nix operations, you can use the permissions on the directory /nix/var/nix/daemon-socket. For instance, if you want to restrict the use of Nix to the members of a group called nix-users, do

$ chgrp nix-users /nix/var/nix/daemon-socket
$ chmod ug=rwx,o= /nix/var/nix/daemon-socket

This way, users who are not in the nix-users group cannot connect to the Unix domain socket /nix/var/nix/daemon-socket/socket, so they cannot perform Nix operations.

3.7. Using Nix

To use Nix, some environment variables should be set. In particular, PATH should contain the directories prefix/bin and ~/.nix-profile/bin. The first directory contains the Nix tools themselves, while ~/.nix-profile is a symbolic link to the current user environment (an automatically generated package consisting of symlinks to installed packages). The simplest way to set the required environment variables is to include the file prefix/etc/profile.d/nix.sh in your ~/.bashrc (or similar), like this:

source prefix/etc/profile.d/nix.sh


[1] Note however that even when the Nix daemon runs as root, not that much code is executed as root: Nix expression evaluation is performed by the calling (unprivileged) user, and builds are performed under the special build user accounts. So only the code that accesses the database and starts builds is executed as root.

Chapter 4. Package Management

This chapter discusses how to do package management with Nix, i.e., how to obtain, install, upgrade, and erase packages. This is the “user’s” perspective of the Nix system — people who want to create packages should consult Chapter 5, Writing Nix Expressions.

4.1. Basic package management

The main command for package management is nix-env. You can use it to install, upgrade, and erase packages, and to query what packages are installed or are available for installation.

In Nix, different users can have different “views” on the set of installed applications. That is, there might be lots of applications present on the system (possibly in many different versions), but users can have a specific selection of those active — where “active” just means that it appears in a directory in the user’s PATH. Such a view on the set of installed applications is called a user environment, which is just a directory tree consisting of symlinks to the files of the active applications.

Components are installed from a set of Nix expressions that tell Nix how to build those packages, including, if necessary, their dependencies. There is a collection of Nix expressions called the Nix Package collection that contains packages ranging from basic development stuff such as GCC and Glibc, to end-user applications like Mozilla Firefox. (Nix is however not tied to the Nix Package collection; you could write your own Nix expressions based on it, or completely new ones.) You can download the latest version from http://nixos.org/nixpkgs/download.html.

Assuming that you have downloaded and unpacked a release of Nix Packages, you can view the set of available packages in the release:

$ nix-env -qaf nixpkgs-version '*'
ant-blackdown-1.4.2
aterm-2.2
bash-3.0
binutils-2.15
bison-1.875d
blackdown-1.4.2
bzip2-1.0.2
...

where nixpkgs-version is where you’ve unpacked the release. The flag -q specifies a query operation; -a means that you want to show the “available” (i.e., installable) packages, as opposed to the installed packages; and -f nixpkgs-version specifies the source of the packages. The argument '*' shows all installable packages. (The quotes are necessary to prevent shell expansion.) You can also select specific packages by name:

$ nix-env -qaf nixpkgs-version gcc
gcc-3.4.6
gcc-4.0.3
gcc-4.1.1

It is also possible to see the status of available packages, i.e., whether they are installed into the user environment and/or present in the system:

$ nix-env -qasf nixpkgs-version '*'
...
-PS bash-3.0
--S binutils-2.15
IPS bison-1.875d
...

The first character (I) indicates whether the package is installed in your current user environment. The second (P) indicates whether it is present on your system (in which case installing it into your user environment would be a very quick operation). The last one (S) indicates whether there is a so-called substitute for the package, which is Nix’s mechanism for doing binary deployment. It just means that Nix knows that it can fetch a pre-built package from somewhere (typically a network server) instead of building it locally.

So now that we have a set of Nix expressions we can build the packages contained in them. This is done using nix-env -i. For instance,

$ nix-env -f nixpkgs-version -i subversion

will install the package called subversion (which is, of course, the Subversion version management system).

When you do this for the first time, Nix will start building Subversion and all its dependencies. This will take quite a while — typically an hour or two on modern machines. Fortunately, there is a faster way (so do a Ctrl-C on that install operation!): you just need to tell Nix that pre-built binaries of all those packages are available somewhere. This is done using the nix-pull command, which must be supplied with a URL containing a manifest describing what binaries are available. This URL should correspond to the Nix Packages release that you’re using. For instance, if you obtained a release from http://nixos.org/releases/nixpkgs/nixpkgs-0.12pre11712-4lrp7j8x, then you should do:

$ nix-pull http://nixos.org/releases/nixpkgs/nixpkgs-0.12pre11712-4lrp7j8x/MANIFEST

If you then issue the installation command, it should start downloading binaries from nixos.org, instead of building them from source. This might still take a while since all dependencies must be downloaded, but on a reasonably fast connection such as an DSL line it’s on the order of a few minutes.

Naturally, packages can also be uninstalled:

$ nix-env -e subversion

Upgrading to a new version is just as easy. If you have a new release of Nix Packages, you can do:

$ nix-env -f nixpkgs-version -u subversion

This will only upgrade Subversion if there is a “newer” version in the new set of Nix expressions, as defined by some pretty arbitrary rules regarding ordering of version numbers (which generally do what you’d expect of them). To just unconditionally replace Subversion with whatever version is in the Nix expressions, use -i instead of -u; -i will remove whatever version is already installed.

You can also upgrade all packages for which there are newer versions:

$ nix-env -f nixpkgs-version -u '*'

Sometimes it’s useful to be able to ask what nix-env would do, without actually doing it. For instance, to find out what packages would be upgraded by nix-env -u '*', you can do

$ nix-env ... -u '*' --dry-run
(dry run; not doing anything)
upgrading `libxslt-1.1.0' to `libxslt-1.1.10'
upgrading `graphviz-1.10' to `graphviz-1.12'
upgrading `coreutils-5.0' to `coreutils-5.2.1'

If you grow bored of specifying the Nix expressions using -f all the time, you can set a default location:

$ nix-env -I nixpkgs-version

After this you can just say, for instance, nix-env -u '*'.[2]

4.2. Profiles

Profiles and user environments are Nix’s mechanism for implementing the ability to allow different users to have different configurations, and to do atomic upgrades and rollbacks. To understand how they work, it’s useful to know a bit about how Nix works. In Nix, packages are stored in unique locations in the Nix store (typically, /nix/store). For instance, a particular version of the Subversion package might be stored in a directory /nix/store/dpmvp969yhdqs7lm2r1a3gng7pyq6vy4-subversion-1.1.3/, while another version might be stored in /nix/store/5mq2jcn36ldlmh93yj1n8s9c95pj7c5s-subversion-1.1.2. The long strings prefixed to the directory names are cryptographic hashes[3] of all inputs involved in building the package — sources, dependencies, compiler flags, and so on. So if two packages differ in any way, they end up in different locations in the file system, so they don’t interfere with each other. Figure 4.1, “User environments” shows a part of a typical Nix store.

Figure 4.1. User environments

User environments

Of course, you wouldn’t want to type

$ /nix/store/dpmvp969yhdq...-subversion-1.1.3/bin/svn

every time you want to run Subversion. Of course we could set up the PATH environment variable to include the bin directory of every package we want to use, but this is not very convenient since changing PATH doesn’t take effect for already existing processes. The solution Nix uses is to create directory trees of symlinks to activated packages. These are called user environments and they are packages themselves (though automatically generated by nix-env), so they too reside in the Nix store. For instance, in Figure 4.1, “User environments” the user environment /nix/store/5mq2jcn36ldl...-user-env contains a symlink to just Subversion 1.1.2 (arrows in the figure indicate symlinks). This would be what we would obtain if we had done

$ nix-env -i subversion

on a set of Nix expressions that contained Subversion 1.1.2.

This doesn’t in itself solve the problem, of course; you wouldn’t want to type /nix/store/0c1p5z4kda11...-user-env/bin/svn either. That’s why there are symlinks outside of the store that point to the user environments in the store; for instance, the symlinks default-42-link and default-43-link in the example. These are called generations since every time you perform a nix-env operation, a new user environment is generated based on the current one. For instance, generation 43 was created from generation 42 when we did

$ nix-env -i subversion mozilla

on a set of Nix expressions that contained Mozilla and a new version of Subversion.

Generations are grouped together into profiles so that different users don’t interfere with each other if they don’t want to. For example:

$ ls -l /nix/var/nix/profiles/
...
lrwxrwxrwx  1 eelco ... default-42-link -> /nix/store/0c1p5z4kda11...-user-env
lrwxrwxrwx  1 eelco ... default-43-link -> /nix/store/3aw2pdyx2jfc...-user-env
lrwxrwxrwx  1 eelco ... default -> default-43-link

This shows a profile called default. The file default itself is actually a symlink that points to the current generation. When we do a nix-env operation, a new user environment and generation link are created based on the current one, and finally the default symlink is made to point at the new generation. This last step is atomic on Unix, which explains how we can do atomic upgrades. (Note that the building/installing of new packages doesn’t interfere in any way with old packages, since they are stored in different locations in the Nix store.)

If you find that you want to undo a nix-env operation, you can just do

$ nix-env --rollback

which will just make the current generation link point at the previous link. E.g., default would be made to point at default-42-link. You can also switch to a specific generation:

$ nix-env --switch-generation 43

which in this example would roll forward to generation 43 again. You can also see all available generations:

$ nix-env --list-generations

Actually, there is another level of indirection not shown in the figure above. You generally wouldn’t have /nix/var/nix/profiles/some-profile/bin in your PATH. Rather, there is a symlink ~/.nix-profile that points to your current profile. This means that you should put ~/.nix-profile/bin in your PATH (and indeed, that’s what the initialisation script /nix/etc/profile.d/nix.sh does). This makes it easier to switch to a different profile. You can do that using the command nix-env --switch-profile:

$ nix-env --switch-profile /nix/var/nix/profiles/my-profile

$ nix-env --switch-profile /nix/var/nix/profiles/default

These commands switch to the my-profile and default profile, respectively. If the profile doesn’t exist, it will be created automatically. You should be careful about storing a profile in another location than the profiles directory, since otherwise it might not be used as a root of the garbage collector (see Section 4.3, “Garbage collection”).

All nix-env operations work on the profile pointed to by ~/.nix-profile, but you can override this using the --profile option (abbreviation -p):

$ nix-env -p /nix/var/nix/profiles/other-profile -i subversion

This will not change the ~/.nix-profile symlink.

4.3. Garbage collection

nix-env operations such as upgrades (-u) and uninstall (-e) never actually delete packages from the system. All they do (as shown above) is to create a new user environment that no longer contains symlinks to the “deleted” packages.

Of course, since disk space is not infinite, unused packages should be removed at some point. You can do this by running the Nix garbage collector. It will remove from the Nix store any package not used (directly or indirectly) by any generation of any profile.

Note however that as long as old generations reference a package, it will not be deleted. After all, we wouldn’t be able to do a rollback otherwise. So in order for garbage collection to be effective, you should also delete (some) old generations. Of course, this should only be done if you are certain that you will not need to roll back.

To delete all old (non-current) generations of your current profile:

$ nix-env --delete-generations old

Instead of old you can also specify a list of generations, e.g.,

$ nix-env --delete-generations 10 11 14

After removing appropriate old generations you can run the garbage collector as follows:

$ nix-store --gc

If you are feeling uncertain, you can also first view what files would be deleted:

$ nix-store --gc --print-dead

Likewise, the option --print-live will show the paths that won’t be deleted.

There is also a convenient little utility nix-collect-garbage, which when invoked with the -d (--delete-old) switch deletes all old generations of all profiles in /nix/var/nix/profiles. So

$ nix-collect-garbage -d

is a quick and easy way to clean up your system.

4.3.1. Garbage collector roots

The roots of the garbage collector are all store paths to which there are symlinks in the directory prefix/nix/var/nix/gcroots. For instance, the following command makes the path /nix/store/d718ef...-foo a root of the collector:

$ ln -s /nix/store/d718ef...-foo /nix/var/nix/gcroots/bar

That is, after this command, the garbage collector will not remove /nix/store/d718ef...-foo or any of its dependencies.

Subdirectories of prefix/nix/var/nix/gcroots are also searched for symlinks. Symlinks to non-store paths are followed and searched for roots, but symlinks to non-store paths inside the paths reached in that way are not followed to prevent infinite recursion.

4.4. Channels

If you want to stay up to date with a set of packages, it’s not very convenient to manually download the latest set of Nix expressions for those packages, use nix-pull to register pre-built binaries (if available), and upgrade using nix-env. Fortunately, there’s a better way: Nix channels.

A Nix channel is just a URL that points to a place that contains a set of Nix expressions and a manifest. Using the command nix-channel you can automatically stay up to date with whatever is available at that URL.

You can “subscribe” to a channel using nix-channel --add, e.g.,

$ nix-channel --add http://nixos.org/releases/nixpkgs/channels/nixpkgs-unstable

subscribes you to a channel that always contains that latest version of the Nix Packages collection. (Instead of nixpkgs-unstable you could also subscribe to nixpkgs-stable, which should have a higher level of stability, but right now is just outdated.) Subscribing really just means that the URL is added to the file ~/.nix-channels. Right now there is no command to “unsubscribe”; you should just edit that file manually and delete the offending URL.

To obtain the latest Nix expressions available in a channel, do

$ nix-channel --update

This downloads the Nix expressions in every channel (downloaded from url/nixexprs.tar.bz2) and registers any available pre-built binaries in every channel (by nix-pulling url/MANIFEST). It also makes the union of each channel’s Nix expressions the default for nix-env operations. Consequently, you can then say

$ nix-env -u '*'

to upgrade all packages in your profile to the latest versions available in the subscribed channels.

4.5. One-click installs

Often, when you want to install a specific package (e.g., from the Nix Packages collection), subscribing to a channel is a bit cumbersome. And channels don’t help you at all if you want to install an older version of a package than the one provided by the current contents of the channel, or a package that has been removed from the channel. That’s when one-click installs come in handy: you can just go to the web page that contains the package, click on it, and it will be installed with all the necessary dependencies.

For instance, you can go to http://hydra.nixos.org/jobset/nixpkgs/trunk/channel/latest and click on any link for the individual packages for your platform. The first time you do this, your browser will ask what to do with application/nix-package files. You should open them with /nix/bin/nix-install-package. This will open a window that asks you to confirm that you want to install the package. When you answer Y, the package and all its dependencies will be installed. This is a binary deployment mechanism — you get packages pre-compiled for the selected platform type.

You can also install application/nix-package files from the command line directly. See nix-install-package(1) for details.

4.6. Sharing packages between machines

Sometimes you want to copy a package from one machine to another. Or, you want to install some packages and you know that another machine already has some or all of those packages or their dependencies. In that case there are mechanisms to quickly copy packages between machines.

The command nix-copy-closure copies a Nix store path along with all its dependencies to or from another machine via the SSH protocol. It doesn’t copy store paths that are already present on the target machine. For example, the following command copies Firefox with all its dependencies:

$ nix-copy-closure --to alice@itchy.example.org $(type -p firefox)

See nix-copy-closure(1) for details.

With nix-store --export and nix-store --import you can write the closure of a store path (that is, the path and all its dependencies) to a file, and then unpack that file into another Nix store. For example,

$ nix-store --export $(type -p firefox) > firefox.closure

writes the closure of Firefox to a file. You can then copy this file to another machine and install the closure:

$ nix-store --import < firefox.closure

Any store paths in the closure that are already present in the target store are ignored. It is also possible to pipe the export into another command, e.g. to copy and install a closure directly to/on another machine:

$ nix-store --export $(type -p firefox) | bzip2 | \
    ssh alice@itchy.example.org "bunzip2 | nix-store --import"

But note that nix-copy-closure is generally more efficient in this example because it only copies paths that are not already present in the target Nix store.

Finally, if you can mount the Nix store of a remote machine in your local filesystem, Nix can copy paths from the remote Nix store to the local Nix store on demand. For instance, suppose that you mount a remote machine containing a Nix store via sshfs:

$ sshfs alice@itchy.example.org:/ /mnt

You should then set the NIX_OTHER_STORES environment variable to tell Nix about this remote Nix store:

$ export NIX_OTHER_STORES=/mnt/nix

Then if you do any Nix operation, e.g.

$ nix-env -i firefox

and Nix has to build a path that it sees is already present in /mnt/nix, then it will just copy from there instead of building it from source.



[2] Setting a default using -I currently clashes with using Nix channels, since nix-channel --update calls nix-env -I to set the default to the Nix expressions it downloaded from the channel, replacing whatever default you had set.

[3] 160-bit truncations of SHA-256 hashes encoded in a base-32 notation, to be precise.

Chapter 5. Writing Nix Expressions

This chapter shows you how to write Nix expressions, which are the things that tell Nix how to build packages. It starts with a simple example (a Nix expression for GNU Hello), and then moves on to a more in-depth look at the Nix expression language.

Note

This chapter is mostly about the Nix expression language. For more extensive information on adding packages to the Nix Packages collection (such as functions in the standard environment and coding conventions), please consult its manual.

5.1. A simple Nix expression

This section shows how to add and test the GNU Hello package to the Nix Packages collection. Hello is a program that prints out the text Hello, world!.

To add a package to the Nix Packages collection, you generally need to do three things:

  1. Write a Nix expression for the package. This is a file that describes all the inputs involved in building the package, such as dependencies, sources, and so on.

  2. Write a builder. This is a shell script[4] that actually builds the package from the inputs.

  3. Add the package to the file pkgs/top-level/all-packages.nix. The Nix expression written in the first step is a function; it requires other packages in order to build it. In this step you put it all together, i.e., you call the function with the right arguments to build the actual package.

5.1.1. The Nix expression

Example 5.1. Nix expression for GNU Hello (default.nix)

{ stdenv, fetchurl, perl }: 1

stdenv.mkDerivation { 2
  name = "hello-2.1.1"; 3
  builder = ./builder.sh; 4
  src = fetchurl { 5
    url = ftp://ftp.nluug.nl/pub/gnu/hello/hello-2.1.1.tar.gz;
    md5 = "70c9ccf9fac07f762c24f2df2290784d";
  };
  inherit perl; 6
}

Example 5.1, “Nix expression for GNU Hello (default.nix)” shows a Nix expression for GNU Hello. It's actually already in the Nix Packages collection in pkgs/applications/misc/hello/ex-1/default.nix. It is customary to place each package in a separate directory and call the single Nix expression in that directory default.nix. The file has the following elements (referenced from the figure by number):

1

This states that the expression is a function that expects to be called with three arguments: stdenv, fetchurl, and perl. They are needed to build Hello, but we don't know how to build them here; that's why they are function arguments. stdenv is a package that is used by almost all Nix Packages packages; it provides a standard environment consisting of the things you would expect in a basic Unix environment: a C/C++ compiler (GCC, to be precise), the Bash shell, fundamental Unix tools such as cp, grep, tar, etc. fetchurl is a function that downloads files. perl is the Perl interpreter.

Nix functions generally have the form { x, y, ..., z }: e where x, y, etc. are the names of the expected arguments, and where e is the body of the function. So here, the entire remainder of the file is the body of the function; when given the required arguments, the body should describe how to build an instance of the Hello package.

2

So we have to build a package. Building something from other stuff is called a derivation in Nix (as opposed to sources, which are built by humans instead of computers). We perform a derivation by calling stdenv.mkDerivation. mkDerivation is a function provided by stdenv that builds a package from a set of attributes. An attribute set is just a list of key/value pairs where each value is an arbitrary Nix expression. They take the general form { name1 = expr1; ... nameN = exprN; }.

3

The attribute name specifies the symbolic name and version of the package. Nix doesn't really care about these things, but they are used by for instance nix-env -q to show a human-readable name for packages. This attribute is required by mkDerivation.

4

The attribute builder specifies the builder. This attribute can sometimes be omitted, in which case mkDerivation will fill in a default builder (which does a configure; make; make install, in essence). Hello is sufficiently simple that the default builder would suffice, but in this case, we will show an actual builder for educational purposes. The value ./builder.sh refers to the shell script shown in Example 5.2, “Build script for GNU Hello (builder.sh)”, discussed below.

5

The builder has to know what the sources of the package are. Here, the attribute src is bound to the result of a call to the fetchurl function. Given a URL and an MD5 hash of the expected contents of the file at that URL, this function builds a derivation that downloads the file and checks its hash. So the sources are a dependency that like all other dependencies is built before Hello itself is built.

Instead of src any other name could have been used, and in fact there can be any number of sources (bound to different attributes). However, src is customary, and it's also expected by the default builder (which we don't use in this example).

6

Since the derivation requires Perl, we have to pass the value of the perl function argument to the builder. All attributes in the set are actually passed as environment variables to the builder, so declaring an attribute

perl = perl;

will do the trick: it binds an attribute perl to the function argument which also happens to be called perl. However, it looks a bit silly, so there is a shorter syntax. The inherit keyword causes the specified attributes to be bound to whatever variables with the same name happen to be in scope.

5.1.2. The builder

Example 5.2. Build script for GNU Hello (builder.sh)

source $stdenv/setup 1

PATH=$perl/bin:$PATH 2

tar xvfz $src 3
cd hello-*
./configure --prefix=$out 4
make 5
make install

Example 5.2, “Build script for GNU Hello (builder.sh)” shows the builder referenced from Hello's Nix expression (stored in pkgs/applications/misc/hello/ex-1/builder.sh). The builder can actually be made a lot shorter by using the generic builder functions provided by stdenv, but here we write out the build steps to elucidate what a builder does. It performs the following steps:

1

When Nix runs a builder, it initially completely clears the environment (except for the attributes declared in the derivation). For instance, the PATH variable is empty[5]. This is done to prevent undeclared inputs from being used in the build process. If for example the PATH contained /usr/bin, then you might accidentally use /usr/bin/gcc.

So the first step is to set up the environment. This is done by calling the setup script of the standard environment. The environment variable stdenv points to the location of the standard environment being used. (It wasn't specified explicitly as an attribute in Example 5.1, “Nix expression for GNU Hello (default.nix)”, but mkDerivation adds it automatically.)

2

Since Hello needs Perl, we have to make sure that Perl is in the PATH. The perl environment variable points to the location of the Perl package (since it was passed in as an attribute to the derivation), so $perl/bin is the directory containing the Perl interpreter.

3

Now we have to unpack the sources. The src attribute was bound to the result of fetching the Hello source tarball from the network, so the src environment variable points to the location in the Nix store to which the tarball was downloaded. After unpacking, we cd to the resulting source directory.

The whole build is performed in a temporary directory created in /tmp, by the way. This directory is removed after the builder finishes, so there is no need to clean up the sources afterwards. Also, the temporary directory is always newly created, so you don't have to worry about files from previous builds interfering with the current build.

4

GNU Hello is a typical Autoconf-based package, so we first have to run its configure script. In Nix every package is stored in a separate location in the Nix store, for instance /nix/store/9a54ba97fb71b65fda531012d0443ce2-hello-2.1.1. Nix computes this path by cryptographically hashing all attributes of the derivation. The path is passed to the builder through the out environment variable. So here we give configure the parameter --prefix=$out to cause Hello to be installed in the expected location.

5

Finally we build Hello (make) and install it into the location specified by out (make install).

If you are wondering about the absence of error checking on the result of various commands called in the builder: this is because the shell script is evaluated with Bash's -e option, which causes the script to be aborted if any command fails without an error check.

5.1.3. Composition

Example 5.3. Composing GNU Hello (all-packages.nix)

...

rec { 1
  
  hello = import ../applications/misc/hello/ex-1 2 { 3
    inherit fetchurl stdenv perl;
  };

  perl = import ../development/interpreters/perl { 4
    inherit fetchurl stdenv;
  };

  fetchurl = import ../build-support/fetchurl { 
    inherit stdenv; ...
  };
  
  stdenv = ...;

}

The Nix expression in Example 5.1, “Nix expression for GNU Hello (default.nix)” is a function; it is missing some arguments that have to be filled in somewhere. In the Nix Packages collection this is done in the file pkgs/top-level/all-packages.nix, where all Nix expressions for packages are imported and called with the appropriate arguments. Example 5.3, “Composing GNU Hello (all-packages.nix)” shows some fragments of all-packages.nix.

1

This file defines a set of attributes, all of which are concrete derivations (i.e., not functions). In fact, we define a mutually recursive set of attributes. That is, the attributes can refer to each other. This is precisely what we want since we want to plug the various packages into each other.

2

Here we import the Nix expression for GNU Hello. The import operation just loads and returns the specified Nix expression. In fact, we could just have put the contents of Example 5.1, “Nix expression for GNU Hello (default.nix)” in all-packages.nix at this point. That would be completely equivalent, but it would make the file rather bulky.

Note that we refer to ../applications/misc/hello/ex-1, not ../applications/misc/hello/ex-1/default.nix. When you try to import a directory, Nix automatically appends /default.nix to the file name.

3

This is where the actual composition takes place. Here we call the function imported from ../applications/misc/hello/ex-1 with an attribute set containing the things that the function expects, namely fetchurl, stdenv, and perl. We use inherit again to use the attributes defined in the surrounding scope (we could also have written fetchurl = fetchurl;, etc.).

The result of this function call is an actual derivation that can be built by Nix (since when we fill in the arguments of the function, what we get is its body, which is the call to stdenv.mkDerivation in Example 5.1, “Nix expression for GNU Hello (default.nix)”).

Note

Nixpkgs has a convenience function callPackage that imports and calls a function, filling in any missing arguments by passing the corresponding attribute from the Nixpkgs set, like this:

hello = callPackage ../applications/misc/hello/ex-1 { };

If necessary, you can set or override arguments:

hello = callPackage ../applications/misc/hello/ex-1 { stdenv = myStdenv; };

4

Likewise, we have to instantiate Perl, fetchurl, and the standard environment.

5.1.4. Testing

You can now try to build Hello. Of course, you could do nix-env -f pkgs/top-level/all-packages.nix -i hello, but you may not want to install a possibly broken package just yet. The best way to test the package is by using the command nix-build, which builds a Nix expression and creates a symlink named result in the current directory:

$ nix-build pkgs/top-level/all-packages.nix -A hello
building path `/nix/store/632d2b22514d...-hello-2.1.1'
hello-2.1.1/
hello-2.1.1/intl/
hello-2.1.1/intl/ChangeLog
...

$ ls -l result
lrwxrwxrwx ... 2006-09-29 10:43 result -> /nix/store/632d2b22514d...-hello-2.1.1

$ ./result/bin/hello
Hello, world!

The -A option selects the hello attribute from all-packages.nix. This is faster than using the symbolic package name specified by the name attribute (which also happens to be hello) and is unambiguous (there can be multiple packages with the symbolic name hello, but there can be only one attribute in a set named hello).

nix-build registers the ./result symlink as a garbage collection root, so unless and until you delete the ./result symlink, the output of the build will be safely kept on your system. You can use nix-build’s -o switch to give the symlink another name.

Nix has a transactional semantics. Once a build finishes successfully, Nix makes a note of this in its database: it registers that the path denoted by out is now valid. If you try to build the derivation again, Nix will see that the path is already valid and finish immediately. If a build fails, either because it returns a non-zero exit code, because Nix or the builder are killed, or because the machine crashes, then the output path will not be registered as valid. If you try to build the derivation again, Nix will remove the output path if it exists (e.g., because the builder died half-way through make install) and try again. Note that there is no negative caching: Nix doesn't remember that a build failed, and so a failed build can always be repeated. This is because Nix cannot distinguish between permanent failures (e.g., a compiler error due to a syntax error in the source) and transient failures (e.g., a disk full condition).

Nix also performs locking. If you run multiple Nix builds simultaneously, and they try to build the same derivation, the first Nix instance that gets there will perform the build, while the others block (or perform other derivations if available) until the build finishes:

$ nix-build pkgs/top-level/all-packages.nix -A hello
waiting for lock on `/nix/store/0h5b7hp8d4hqfrw8igvx97x1xawrjnac-hello-2.1.1x'

So it is always safe to run multiple instances of Nix in parallel (which isn’t the case with, say, make).

If you have a system with multiple CPUs, you may want to have Nix build different derivations in parallel (insofar as possible). Just pass the option -j N, where N is the maximum number of jobs to be run in parallel, or set. Typically this should be the number of CPUs.

5.1.5. The generic builder

Recall from Example 5.2, “Build script for GNU Hello (builder.sh)” that the builder looked something like this:

PATH=$perl/bin:$PATH
tar xvfz $src
cd hello-*
./configure --prefix=$out
make
make install

The builders for almost all Unix packages look like this — set up some environment variables, unpack the sources, configure, build, and install. For this reason the standard environment provides some Bash functions that automate the build process. A builder using the generic build facilities in shown in Example 5.4, “Build script using the generic build functions”.

Example 5.4. Build script using the generic build functions

buildInputs="$perl" 1

source $stdenv/setup 2

genericBuild 3

1

The buildInputs variable tells setup to use the indicated packages as inputs. This means that if a package provides a bin subdirectory, it's added to PATH; if it has a include subdirectory, it's added to GCC's header search path; and so on.[6]

2

The function genericBuild is defined in the file $stdenv/setup.

3

The final step calls the shell function genericBuild, which performs the steps that were done explicitly in Example 5.2, “Build script for GNU Hello (builder.sh)”. The generic builder is smart enough to figure out whether to unpack the sources using gzip, bzip2, etc. It can be customised in many ways; see Section 5.3, “The standard environment”.

Discerning readers will note that the buildInputs could just as well have been set in the Nix expression, like this:

  buildInputs = [ perl ];

The perl attribute can then be removed, and the builder becomes even shorter:

source $stdenv/setup
genericBuild

In fact, mkDerivation provides a default builder that looks exactly like that, so it is actually possible to omit the builder for Hello entirely.

5.2. The Nix expression language

The Nix expression language is a pure, lazy, functional language. Purity means that operations in the language don't have side-effects (for instance, there is no variable assignment). Laziness means that arguments to functions are evaluated only when they are needed. Functional means that functions are normal values that can be passed around and manipulated in interesting ways. The language is not a full-featured, general purpose language. It's main job is to describe packages, compositions of packages, and the variability within packages.

This section presents the various features of the language.

5.2.1. Values

Simple values

Nix has the following basic data types:

  • Strings can be written in three ways.

    The most common way is to enclose the string between double quotes, e.g., "foo bar". Strings can span multiple lines. The special characters " and \ and the character sequence ${ must be escaped by prefixing them with a backslash (\). Newlines, carriage returns and tabs can be written as \n, \r and \t, respectively.

    You can include the result of an expression into a string by enclosing it in ${...}, a feature known as antiquotation. The enclosed expression must evaluate to something that can be coerced into a string (meaning that it must be a string, a path, or a derivation). For instance, rather than writing

    "--with-freetype2-library=" + freetype + "/lib"

    (where freetype is a derivation), you can instead write the more natural

    "--with-freetype2-library=${freetype}/lib"

    The latter is automatically translated to the former. A more complicated example (from the Nix expression for Qt):

    configureFlags = "
      -system-zlib -system-libpng -system-libjpeg
      ${if openglSupport then "-dlopen-opengl
        -L${mesa}/lib -I${mesa}/include
        -L${libXmu}/lib -I${libXmu}/include" else ""}
      ${if threadSupport then "-thread" else "-no-thread"}
    ";

    Note that Nix expressions and strings can be arbitrarily nested; in this case the outer string contains various antiquotations that themselves contain strings (e.g., "-thread"), some of which in turn contain expressions (e.g., ${mesa}).

    The second way to write string literals is as an indented string, which is enclosed between pairs of double single-quotes, like so:

    ''
      This is the first line.
      This is the second line.
        This is the third line.
    ''

    This kind of string literal intelligently strips indentation from the start of each line. To be precise, it strips from each line a number of spaces equal to the minimal indentation of the string as a whole (disregarding the indentation of empty lines). For instance, the first and second line are indented two space, while the third line is indented three spaces. Thus, two spaces are stripped from each line, so the resulting string is

        
    "This is the first line.\nThis is the second line.\n  This is the third line.\n"

    Note that the whitespace and newline following the opening '' is ignored if there is no non-whitespace text on the initial line.

    Antiquotation (${expr}}) is supported in indented strings.

    Since ${ and '' have special meaning in indented strings, you need a way to quote them. ${ can be escaped by prefixing it with '', i.e., ''${. '' can be escaped by prefixing it with ', i.e., '''. Finally, linefeed, carriage-return and tab characters can be writted as ''\n, ''\r, ''\t.

    Indented strings are primarily useful in that they allow multi-line string literals to follow the indentation of the enclosing Nix expression, and that less escaping is typically necessary for strings representing languages such as shell scripts and configuration files because '' is much less common than ". Example:

    stdenv.mkDerivation {
      ...
      postInstall =
        ''
          mkdir $out/bin $out/etc
          cp foo $out/bin
          echo "Hello World" > $out/etc/foo.conf
          ${if enableBar then "cp bar $out/bin" else ""}
        '';
      ...
    }    
    

    Finally, as a convenience, URIs as defined in appendix B of RFC 2396 can be written as is, without quotes. For instance, the string "http://example.org/foo.tar.bz2" can also be written as http://example.org/foo.tar.bz2.

  • Integers, e.g., 123.

  • Paths, e.g., /bin/sh or ./builder.sh. A path must contain at least one slash to be recognised as such; for instance, builder.sh is not a path[7]. If the file name is relative, i.e., if it does not begin with a slash, it is made absolute at parse time relative to the directory of the Nix expression that contained it. For instance, if a Nix expression in /foo/bar/bla.nix refers to ../xyzzy/fnord.nix, the absolutised path is /foo/xyzzy/fnord.nix.

  • Booleans with values true and false.

Lists

Lists are formed by enclosing a whitespace-separated list of values between square brackets. For example,

[ 123 ./foo.nix "abc" (f { x = y; }) ]

defines a list of four elements, the last being the result of a call to the function f. Note that function calls have to be enclosed in parentheses. If they had been omitted, e.g.,

[ 123 ./foo.nix "abc" f { x = y; } ]

the result would be a list of five elements, the fourth one being a function and the fifth being an attribute set.

Attribute sets

Attribute sets are really the core of the language, since ultimately it's all about creating derivations, which are really just sets of attributes to be passed to build scripts.

Attribute sets are just a list of name/value pairs enclosed in curly brackets, where each value is an arbitrary expression terminated by a semicolon. For example:

{ x = 123;
  text = "Hello";
  y = f { bla = 456; };
}

This defines an attribute set with attributes named x, test, y. The order of the attributes is irrelevant. An attribute name may only occur once.

Attributes can be selected from an attribute set using the . operator. For instance,

{ a = "Foo"; b = "Bar"; }.a

evaluates to "Foo". It is possible to provide a default value in an attribute selection using the or keyword. For example,

{ a = "Foo"; b = "Bar"; }.c or "Xyzzy"

will evaluate to "Xyzzy" because there is no c attribute in the set.

You can use arbitrary string constants as attribute names by enclosing them in quotes:

{ "foo bar" = 123; "nix-1.0" = 456; }."foo bar" 

This will evaluate to 123.

5.2.2. Language constructs

Recursive attribute sets

Recursive attribute sets are just normal attribute sets, but the attributes can refer to each other. For example,

rec {
  x = y;
  y = 123;
}.x

evaluates to 123. Note that without rec the binding x = y; would refer to the variable y in the surrounding scope, if one exists, and would be invalid if no such variable exists. That is, in a normal (non-recursive) attribute set, attributes are not added to the lexical scope; in a recursive set, they are.

Recursive attribute sets of course introduce the danger of infinite recursion. For example,

rec {
  x = y;
  y = x;
}.x

does not terminate[8].

Let-expressions

A let-expression allows you define local variables for an expression. For instance,

let
  x = "foo";
  y = "bar";
in x + y

evaluates to "foobar".

Note

There is also an obsolete form of let-expression, let { attrs }, which is translated to rec { attrs }.body. That is, the body of the let-expression is the body attribute of the attribute set.

Inheriting attributes

When defining an attribute set it is often convenient to copy variables from the surrounding lexical scope (e.g., when you want to propagate attributes). This can be shortened using the inherit keyword. For instance,

let x = 123; in 
{ inherit x;
  y = 456;
}

evaluates to { x = 123; y = 456; }. (Note that this works because x is added to the lexical scope by the let construct.) It is also possible to inherit attributes from another attribute set. For instance, in this fragment from all-packages.nix,

  graphviz = (import ../tools/graphics/graphviz) {
    inherit fetchurl stdenv libpng libjpeg expat x11 yacc;
    inherit (xlibs) libXaw;
  };

  xlibs = {
    libX11 = ...;
    libXaw = ...;
    ...
  }

  libpng = ...;
  libjpg = ...;
  ...

the attribute set used in the function call to the function defined in ../tools/graphics/graphviz inherits a number of variables from the surrounding scope (fetchurl ... yacc), but also inherits libXaw (the X Athena Widgets) from the xlibs (X11 client-side libraries) attribute set.

Functions

Functions have the following form:

pattern: body

The pattern specifies what the argument of the function must look like, and binds variables in the body to (parts of) the argument. There are three kinds of patterns:

  • If a pattern is a single identifier, then the function matches any argument. Example:

    let negate = x: !x;
        concat = x: y: x + y;
    in if negate true then concat "foo" "bar" else ""

    Note that concat is a function that takes one argument and returns a function that takes another argument. This allows partial parameterisation (i.e., only filling some of the arguments of a function); e.g.,

    map (concat "foo") [ "bar" "bla" "abc" ]

    evaluates to [ "foobar" "foobla" "fooabc" ].

  • An attribute set pattern of the form { name1, name2, …, nameN } matches an attribute set containing the listed attributes, and binds the values of those attributes to variables in the function body. For example, the function

    { x, y, z }: z + y + x

    can only be called with a set containing exactly the attributes x, y and z. No other attributes are allowed. If you want to allow additional arguments, you can use an ellipsis (...):

    { x, y, z, ... }: z + y + x

    This works on any set that contains at least the three named attributes.

    It is possible to provide default values for attributes, in which case they are allowed to be missing. A default value is specified by writing name ? e, where e is an arbitrary expression. For example,

    { x, y ? "foo", z ? "bar" }: z + y + x

    specifies a function that only requires an attribute named x, but optionally accepts y and z.

  • An @-pattern requires that the argument matches with the patterns on the left- and right-hand side of the @-sign. For example:

    args@{ x, y, z, ... }: z + y + x + args.a

    Here args is bound to the entire argument, which is further matches against the pattern { x, y, z, ... }.

Note that functions do not have names. If you want to give them a name, you can bind them to an attribute, e.g.,

let concat = { x, y }: x + y;
in concat { x = "foo"; y = "bar"; }

Conditionals

Conditionals look like this:

if e1 then e2 else e3

where e1 is an expression that should evaluate to a Boolean value (true or false).

Assertions

Assertions are generally used to check that certain requirements on or between features and dependencies hold. They look like this:

assert e1; e2

where e1 is an expression that should evaluate to a Boolean value. If it evaluates to true, e2 is returned; otherwise expression evaluation is aborted and a backtrace is printed.

Example 5.5. Nix expression for Subversion

{ localServer ? false
, httpServer ? false
, sslSupport ? false
, pythonBindings ? false
, javaSwigBindings ? false
, javahlBindings ? false
, stdenv, fetchurl
, openssl ? null, httpd ? null, db4 ? null, expat, swig ? null, j2sdk ? null
}:

assert localServer -> db4 != null; 1
assert httpServer -> httpd != null && httpd.expat == expat; 2
assert sslSupport -> openssl != null && (httpServer -> httpd.openssl == openssl); 3
assert pythonBindings -> swig != null && swig.pythonSupport;
assert javaSwigBindings -> swig != null && swig.javaSupport;
assert javahlBindings -> j2sdk != null;

stdenv.mkDerivation {
  name = "subversion-1.1.1";
  ...
  openssl = if sslSupport then openssl else null; 4
  ...
}

Example 5.5, “Nix expression for Subversion” show how assertions are used in the Nix expression for Subversion.

1

This assertion states that if Subversion is to have support for local repositories, then Berkeley DB is needed. So if the Subversion function is called with the localServer argument set to true but the db4 argument set to null, then the evaluation fails.

2

This is a more subtle condition: if Subversion is built with Apache (httpServer) support, then the Expat library (an XML library) used by Subversion should be same as the one used by Apache. This is because in this configuration Subversion code ends up being linked with Apache code, and if the Expat libraries do not match, a build- or runtime link error or incompatibility might occur.

3

This assertion says that in order for Subversion to have SSL support (so that it can access https URLs), an OpenSSL library must be passed. Additionally, it says that if Apache support is enabled, then Apache's OpenSSL should match Subversion's. (Note that if Apache support is not enabled, we don't care about Apache's OpenSSL.)

4

The conditional here is not really related to assertions, but is worth pointing out: it ensures that if SSL support is disabled, then the Subversion derivation is not dependent on OpenSSL, even if a non-null value was passed. This prevents an unnecessary rebuild of Subversion if OpenSSL changes.

With-expressions

A with-expression,

with e1; e2

introduces the attribute set e1 into the lexical scope of the expression e2. For instance,

let as = { x = "foo"; y = "bar"; };
in with as; x + y

evaluates to "foobar" since the with adds the x and y attributes of as to the lexical scope in the expression x + y. The most common use of with is in conjunction with the import function. E.g.,

with (import ./definitions.nix); ...

makes all attributes defined in the file definitions.nix available as if they were defined locally in a rec-expression.

Comments

Comments can be single-line, started with a # character, or inline/multi-line, enclosed within /* ... */.

5.2.3. Operators

Table 5.1, “Operators” lists the operators in the Nix expression language, in order of precedence (from strongest to weakest binding).

Table 5.1. Operators

SyntaxAssociativityDescription
e . attrpath [ or def ] noneSelect attribute denoted by the attribute path attrpath from attribute set e. (An attribute path is a dot-separated list of attribute names.) If the attribute doesn’t exist, return def if provided, otherwise abort evaluation.
e1 e2leftCall function e1 with argument e2.
e ? attrpathnoneTest whether attribute set e contains the attribute denoted by attrpath; return true or false.
e1 ++ e2rightList concatenation.
e1 + e2leftString or path concatenation.
! eleftBoolean negation.
e1 // e2rightReturn an attribute set consisting of the attributes in e1 and e2 (with the latter taking precedence over the former in case of equally named attributes).
e1 == e2noneEquality.
e1 != e2noneInequality.
e1 && e2leftLogical AND.
e1 || e2leftLogical OR.
e1 -> e2noneLogical implication (equivalent to !e1 || e2).

5.2.4. Derivations

The most important built-in function is derivation, which is used to describe a single derivation (a build action). It takes as input an attribute set, the attributes of which specify the inputs of the build.

  • There must be an attribute named system whose value must be a string specifying a Nix platform identifier, such as "i686-linux" or "powerpc-darwin"[9] The build can only be performed on a machine and operating system matching the platform identifier. (Nix can automatically forward builds for other platforms by forwarding them to other machines; see Chapter 6, Setting Up Distributed Builds.)

  • There must be an attribute named name whose value must be a string. This is used as a symbolic name for the package by nix-env, and it is appended to the hash in the output path of the derivation.

  • There must be an attribute named builder that identifies the program that is executed to perform the build. It can be either a derivation or a source (a local file reference, e.g., ./builder.sh).

  • Every attribute is passed as an environment variable to the builder. Attribute values are translated to environment variables as follows:

    • Strings, URIs, and integers are just passed verbatim.

    • A path (e.g., ../foo/sources.tar) causes the referenced file to be copied to the store; its location in the store is put in the environment variable. The idea is that all sources should reside in the Nix store, since all inputs to a derivation should reside in the Nix store.

    • A derivation causes that derivation to be built prior to the present derivation; the output path is put in the environment variable.

    • Lists of the previous types are also allowed. They are simply concatenated, separated by spaces.

    • true is passed as the string 1, false and null are passed as an empty string.

  • The optional attribute args specifies command-line arguments to be passed to the builder. It should be a list.

(Note that mkDerivation in the standard environment is a wrapper around derivation that adds a default value for system and always uses Bash as the builder, to which the supplied builder is passed as a command-line argument. See Section 5.3, “The standard environment”.)

The builder is executed as follows:

  • A temporary directory is created under the directory specified by TMPDIR (default /tmp) where the build will take place. The current directory is changed to this directory.

  • The environment is cleared and set to the derivation attributes, as specified above.

  • In addition, the following variables are set:

    • NIX_BUILD_TOP contains the path of the temporary directory for this build.

    • Also, TMPDIR, TEMPDIR, TMP, TEMP are set to point to the temporary directory. This is to prevent the builder from accidentally writing temporary files anywhere else. Doing so might cause interference by other processes.

    • PATH is set to /path-not-set to prevent shells from initialising it to their built-in default value.

    • HOME is set to /homeless-shelter to prevent programs from using /etc/passwd or the like to find the user's home directory, which could cause impurity. Usually, when HOME is set, it is used as the location of the home directory, even if it points to a non-existent path.

    • NIX_STORE is set to the path of the top-level Nix store directory (typically, /nix/store).

    • out is set to point to the output path of the derivation, which is a subdirectory of the Nix store. The output path is a concatenation of the cryptographic hash of all build inputs, and the name attribute.

  • If the output path already exists, it is removed. Also, locks are acquired to prevent multiple Nix instances from performing the same build at the same time.

  • A log of the combined standard output and error is written to /nix/var/log/nix.

  • The builder is executed with the arguments specified by the attribute args. If it exits with exit code 0, it is considered to have succeeded.

  • The temporary directory is removed (unless the -K option was specified).

  • If the build was successful, Nix scans the output for references to the paths of the inputs. These so-called retained dependencies could be used when the output of the derivation is used (e.g., when it's executed or used as input to another derivation), so if we deploy the derivation, we should copy the retained dependencies as well. The scan is performed by looking for the hash parts of file names of the inputs.

  • After the build, Nix sets the last-modified timestamp on all files in the build result to 1 (00:00:01 1/1/1970 UTC), sets the group to the default group, and sets the mode of the file to 0444 or 0555 (i.e., read-only, with execute permission enabled if the file was originally executable). Note that possible setuid and setgid bits are cleared. Setuid and setgid programs are not currently supported by Nix. This is because the Nix archives used in deployment have no concept of ownership information, and because it makes the build result dependent on the user performing the build.

5.2.4.1. Advanced attributes

Derivations can declare some infrequently used optional attributes.

allowedReferences

The optional attribute allowedReferences specifies a list of legal references (dependencies) of the output of the builder. For example,

allowedReferences = [];

enforces that the output of a derivation cannot have any runtime dependencies on its inputs. This is used in NixOS to check that generated files such as initial ramdisks for booting Linux don’t have accidental dependencies on other paths in the Nix store.

exportReferencesGraph

This attribute allows builders access to the references graph of their inputs. The attribute is a list of inputs in the Nix store whose references graph the builder needs to know. The value of this attribute should be a list of pairs [ name1 path1 name2 path2 ... ]. The references graph of each pathN will be stored in a text file nameN in the temporary build directory. The text files have the format used by nix-store --register-validity (with the deriver fields left empty). For example, when the following derivation is built:

derivation {
  ...
  exportReferencesGraph = [ "libfoo-graph" libfoo ];
};

the references graph of libfoo is placed in the file libfoo-graph in the temporary build directory.

exportReferencesGraph is useful for builders that want to do something with the closure of a store path. Examples include the builders in NixOS that generate the initial ramdisk for booting Linux (a cpio archive containing the closure of the boot script) and the ISO-9660 image for the installation CD (which is populated with a Nix store containing the closure of a bootable NixOS configuration).

outputHash, outputHashAlgo, outputHashMode

These attributes declare that the derivation is a so-called fixed-output derivation, which means that a cryptographic hash of the output is already known in advance. When the build of a fixed-output derivation finishes, Nix computes the cryptographic hash of the output and compares it to the hash declared with these attributes. If there is a mismatch, the build fails.

The rationale for fixed-output derivations is derivations such as those produced by the fetchurl function. This function downloads a file from a given URL. To ensure that the downloaded file has not been modified, the caller must also specify a cryptographic hash of the file. For example,

fetchurl {
  url = http://ftp.gnu.org/pub/gnu/hello/hello-2.1.1.tar.gz;
  md5 = "70c9ccf9fac07f762c24f2df2290784d";
}

It sometimes happens that the URL of the file changes, e.g., because servers are reorganised or no longer available. We then must update the call to fetchurl, e.g.,

fetchurl {
  url = ftp://ftp.nluug.nl/pub/gnu/hello/hello-2.1.1.tar.gz;
  md5 = "70c9ccf9fac07f762c24f2df2290784d";
}

If a fetchurl derivation was treated like a normal derivation, the output paths of the derivation and all derivations depending on it would change. For instance, if we were to change the URL of the Glibc source distribution in Nixpkgs (a package on which almost all other packages depend) massive rebuilds would be needed. This is unfortunate for a change which we know cannot have a real effect as it propagates upwards through the dependency graph.

For fixed-output derivations, on the other hand, the name of the output path only depends on the outputHash* and name attributes, while all other attributes are ignored for the purpose of computing the output path. (The name attribute is included because it is part of the path.)

As an example, here is the (simplified) Nix expression for fetchurl:

{ stdenv, curl }: # The curl program is used for downloading.

{ url, md5 }:

stdenv.mkDerivation {
  name = baseNameOf (toString url);
  builder = ./builder.sh;
  buildInputs = [ curl ];

  # This is a fixed-output derivation; the output must be a regular
  # file with MD5 hash md5.
  outputHashMode = "flat";
  outputHashAlgo = "md5";
  outputHash = md5;
  
  inherit url;
}

The outputHashAlgo attribute specifies the hash algorithm used to compute the hash. It can currently be "md5", "sha1" or "sha256".

The outputHashMode attribute determines how the hash is computed. It must be one of the following two values:

"flat"

The output must be a non-executable regular file. If it isn’t, the build fails. The hash is simply computed over the contents of that file (so it’s equal to what Unix commands like md5sum or sha1sum produce).

This is the default.

"recursive"

The hash is computed over the NAR archive dump of the output (i.e., the result of nix-store --dump). In this case, the output can be anything, including a directory tree.

The outputHash attribute, finally, must be a string containing the hash in either hexadecimal or base-32 notation. (See the nix-hash command for information about converting to and from base-32 notation.)

impureEnvVars

This attribute allows you to specify a list of environment variables that should be passed from the environment of the calling user to the builder. Usually, the environment is cleared completely when the builder is executed, but with this attribute you can allow specific environment variables to be passed unmodified. For example, fetchurl in Nixpkgs has the line

impureEnvVars = [ "http_proxy" "https_proxy" ... ];

to make it use the proxy server configuration specified by the user in the environment variables http_proxy and friends.

This attribute is only allowed in fixed-output derivations, where impurities such as these are okay since (the hash of) the output is known in advance. It is ignored for all other derivations.

preferLocalBuild

If this attribute is set to true and distributed building is enabled, then, if possible, perform this build locally instead of forwarding it to a remote machine. This is appropriate for trivial builders where the cost of doing a remote build would exceed the cost of building locally.

5.2.5. Built-in functions

This section lists the functions and constants built into the Nix expression evaluator. (The built-in function derivation is discussed above.) Some built-ins, such as derivation, are always in scope of every Nix expression; you can just access them right away. But to prevent polluting the namespace too much, most built-ins are not in scope. Instead, you can access them through the builtins built-in value, which is an attribute set that contains all built-in functions and values. For instance, derivation is also available as builtins.derivation.

abort s

Abort Nix expression evaluation, print error message s.

builtins.add e1 e2

Return the sum of the integers e1 and e2.

builtins.attrNames attrs

Return the names of the attributes in the attribute set attrs in a sorted list. For instance, builtins.attrNames { y = 1; x = "foo"; } evaluates to [ "x" "y" ]. There is no built-in function attrValues, but you can easily define it yourself:

attrValues = attrs: map (name: builtins.getAttr name attrs) (builtins.attrNames attrs);

baseNameOf s

Return the base name of the string s, that is, everything following the final slash in the string. This is similar to the GNU basename command.

builtins

The attribute set builtins contains all the built-in functions and values. You can use builtins to test for the availability of features in the Nix installation, e.g.,

if builtins ? getEnv then builtins.getEnv "PATH" else ""

This allows a Nix expression to fall back gracefully on older Nix installations that don’t have the desired built-in function.

builtins.compareVersions s1 s2

Compare two strings representing versions and return -1 if version s1 is older than version s2, 0 if they are the same, and 1 if s1 is newer than s2. The version comparison algorithm is the same as the one used by nix-env -u.

builtins.currentSystem

The built-in value currentSystem evaluates to the Nix platform identifier for the Nix installation on which the expression is being evaluated, such as "i686-linux" or "powerpc-darwin".

derivation attrs

derivation is described in Section 5.2.4, “Derivations”.

dirOf s

Return the directory part of the string s, that is, everything before the final slash in the string. This is similar to the GNU dirname command.

builtins.div e1 e2

Return the quotient of the integers e1 and e2.

builtins.filterSource e1 e2

This function allows you to copy sources into the Nix store while filtering certain files. For instance, suppose that you want to use the directory source-dir as an input to a Nix expression, e.g.

stdenv.mkDerivation {
  ...
  src = ./source-dir;
}

However, if source-dir is a Subversion working copy, then all those annoying .svn subdirectories will also be copied to the store. Worse, the contents of those directories may change a lot, causing lots of spurious rebuilds. With filterSource you can filter out the .svn directories:

  src = builtins.filterSource
    (path: type: type != "directory" || baseNameOf path != ".svn")
    ./source-dir;

Thus, the first argument e1 must be a predicate function that is called for each regular file, directory or symlink in the source tree e2. If the function returns true, the file is copied to the Nix store, otherwise it is omitted. The function is called with two arguments. The first is the full path of the file. The second is a string that identifies the type of the file, which is either "regular", "directory", "symlink" or "unknown" (for other kinds of files such as device nodes or fifos — but note that those cannot be copied to the Nix store, so if the predicate returns true for them, the copy will fail).

builtins.getAttr s attrs

getAttr returns the attribute named s from the attribute set attrs. Evaluation aborts if the attribute doesn’t exist. This is a dynamic version of the . operator, since s is an expression rather than an identifier.

builtins.getEnv s

getEnv returns the value of the environment variable s, or an empty string if the variable doesn’t exist. This function should be used with care, as it can introduce all sorts of nasty environment dependencies in your Nix expression.

getEnv is used in Nix Packages to locate the file ~/.nixpkgs/config.nix, which contains user-local settings for Nix Packages. (That is, it does a getEnv "HOME" to locate the user’s home directory.)

builtins.hasAttr s attrs

hasAttr returns true if the attribute set attrs has an attribute named s, and false otherwise. This is a dynamic version of the ? operator, since s is an expression rather than an identifier.

builtins.head list

Return the first element of a list; abort evaluation if the argument isn’t a list or is an empty list. You can test whether a list is empty by comparing it with [].

import path

Load, parse and return the Nix expression in the file path. Evaluation aborts if the file doesn’t exist or contains an incorrect Nix expression. import implements Nix’s module system: you can put any Nix expression (such as an attribute set or a function) in a separate file, and use it from Nix expressions in other files.

A Nix expression loaded by import must not contain any free variables (identifiers that are not defined in the Nix expression itself and are not built-in). Therefore, it cannot refer to variables that are in scope at the call site. For instance, if you have a calling expression

rec {
  x = 123;
  y = import ./foo.nix;
}

then the following foo.nix will give an error:

x + 456

since x is not in scope in foo.nix. If you want x to be available in foo.nix, you should pass it as a function argument:

rec {
  x = 123;
  y = import ./foo.nix x;
}

and

x: x + 456

(The function argument doesn’t have to be called x in foo.nix; any name would work.)

builtins.intersectAttrs e1 e2

Return an attribute set consisting of the attributes in the set e2 that also exist in the set e1.

builtins.isAttrs e

Return true if e evaluates to an attribute set, and false otherwise.

builtins.isList e

Return true if e evaluates to a list, and false otherwise.

builtins.isFunction e

Return true if e evaluates to a function, and false otherwise.

builtins.isString e

Return true if e evaluates to a string, and false otherwise.

builtins.isInt e

Return true if e evaluates to a int, and false otherwise.

builtins.isBool e

Return true if e evaluates to a bool, and false otherwise.

isNull e

Return true if e evaluates to null, and false otherwise.

Warning

This function is deprecated; just write e == null instead.

builtins.length e

Return the length of the list e.

builtins.lessThan e1 e2

Return true if the integer e1 is less than the integer e2, and false otherwise. Evaluation aborts if either e1 or e2 does not evaluate to an integer.

builtins.listToAttrs e

Construct an attribute set from a list specifying the names and values of each attribute. Each element of the list should be an attribute set consisting of a string-valued attribute name specifying the name of the attribute, and an attribute value specifying its value. Example:

builtins.listToAttrs
  [ { name = "foo"; value = 123; }
    { name = "bar"; value = 456; }
  ]

evaluates to

{ foo = 123; bar = 456; }

map f list

Apply the function f to each element in the list list. For example,

map (x: "foo" + x) [ "bar" "bla" "abc" ]

evaluates to [ "foobar" "foobla" "fooabc" ].

builtins.mul e1 e2

Return the product of the integers e1 and e2.

builtins.parseDrvName s

Split the string s into a package name and version. The package name is everything up to but not including the first dash followed by a digit, and the version is everything following that dash. The result is returned in an attribute set { name, version }. Thus, builtins.parseDrvName "nix-0.12pre12876" returns { name = "nix"; version = "0.12pre12876"; }.

builtins.pathExists path

Return true if the path path exists, and false otherwise. One application of this function is to conditionally include a Nix expression containing user configuration:

let
  fileName = builtins.getEnv "CONFIG_FILE";
  config =
    if fileName != "" && builtins.pathExists (builtins.toPath fileName)
    then import (builtins.toPath fileName)
    else { someSetting = false; }; # default configuration
in config.someSetting

(Note that CONFIG_FILE must be an absolute path for this to work.)

builtins.readFile path

Return the contents of the file path as a string.

removeAttrs attrs list

Remove the attributes listed in list from the attribute set attrs. The attributes don’t have to exist in attrs. For instance,

removeAttrs { x = 1; y = 2; z = 3; } [ "a" "x" "z" ]

evaluates to { y = 2; }.

builtins.stringLength e

Return the length of the string e. If e is not a string, evaluation is aborted.

builtins.sub e1 e2

Return the difference between the integers e1 and e2.

builtins.substring start len s

Return the substring of s from character position start (zero-based) up to but not including start + len. If start is greater than the length of the string, an empty string is returned, and if start + len lies beyond the end of the string, only the substring up to the end of the string is returned. start must be non-negative.

builtins.tail list

Return the second to last elements of a list; abort evaluation if the argument isn’t a list or is an empty list.

throw s

Throw an error message s. This usually aborts Nix expression evaluation, but in nix-env -qa and other commands that try to evaluate a set of derivations to get information about those derivations, a derivation that throws an error is silently skipped (which is not the case for abort).

builtins.toFile name s

Store the string s in a file in the Nix store and return its path. The file has suffix name. This file can be used as an input to derivations. One application is to write builders “inline”. For instance, the following Nix expression combines Example 5.1, “Nix expression for GNU Hello (default.nix)” and Example 5.2, “Build script for GNU Hello (builder.sh)” into one file:

{ stdenv, fetchurl, perl }:

stdenv.mkDerivation {
  name = "hello-2.1.1";
  
  builder = builtins.toFile "builder.sh" "
    source $stdenv/setup

    PATH=$perl/bin:$PATH

    tar xvfz $src
    cd hello-*
    ./configure --prefix=$out
    make
    make install
  ";

  src = fetchurl {
    url = http://nix.cs.uu.nl/dist/tarballs/hello-2.1.1.tar.gz;
    md5 = "70c9ccf9fac07f762c24f2df2290784d";
  };
  inherit perl;
}

It is even possible for one file to refer to another, e.g.,

  builder = let
    configFile = builtins.toFile "foo.conf" "
      # This is some dummy configuration file.
      ...
    ";
  in builtins.toFile "builder.sh" "
    source $stdenv/setup
    ...
    cp ${configFile} $out/etc/foo.conf
  ";

Note that ${configFile} is an antiquotation (see Section 5.2.1, “Values”), so the result of the expression configFile (i.e., a path like /nix/store/m7p7jfny445k...-foo.conf) will be spliced into the resulting string.

It is however not allowed to have files mutually referring to each other, like so:

let
  foo = builtins.toFile "foo" "...${bar}...";
  bar = builtins.toFile "bar" "...${foo}...";
in foo

This is not allowed because it would cause a cyclic dependency in the computation of the cryptographic hashes for foo and bar.

builtins.toPath s

Convert the string value s into a path value. The string s must represent an absolute path (i.e., must start with /). The path need not exist. The resulting path is canonicalised, e.g., builtins.toPath "//foo/xyzzy/../bar/" returns /foo/bar.

toString e

Convert the expression e to a string. e can be a string (in which case toString is a no-op) or a path (e.g., toString /foo/bar yields "/foo/bar".

builtins.toXML e

Return a string containing an XML representation of e. The main application for toXML is to communicate information with the builder in a more structured format than plain environment variables.

Example 5.6, “Passing information to a builder using toXML shows an example where this is the case. The builder is supposed to generate the configuration file for a Jetty servlet container. A servlet container contains a number of servlets (*.war files) each exported under a specific URI prefix. So the servlet configuration is a list of attribute sets containing the path and war of the servlet (3). This kind of information is difficult to communicate with the normal method of passing information through an environment variable, which just concatenates everything together into a string (which might just work in this case, but wouldn’t work if fields are optional or contain lists themselves). Instead the Nix expression is converted to an XML representation with toXML, which is unambiguous and can easily be processed with the appropriate tools. For instance, in the example an XSLT stylesheet (2) is applied to it (1) to generate the XML configuration file for the Jetty server. The XML representation produced from 3 by toXML is shown in Example 5.7, “XML representation produced by toXML.

Note that Example 5.6, “Passing information to a builder using toXML uses the toFile built-in to write the builder and the stylesheet “inline” in the Nix expression. The path of the stylesheet is spliced into the builder at xsltproc ${stylesheet} ....

Example 5.6. Passing information to a builder using toXML

{ stdenv, fetchurl, libxslt, jira, uberwiki }:

stdenv.mkDerivation (rec {
  name = "web-server";

  buildInputs = [ libxslt ];
  
  builder = builtins.toFile "builder.sh" "
    source $stdenv/setup
    mkdir $out
    echo $servlets | xsltproc ${stylesheet} - > $out/server-conf.xml 1 
  ";

  stylesheet = builtins.toFile "stylesheet.xsl" 2 
   "<?xml version='1.0' encoding='UTF-8'?>
    <xsl:stylesheet xmlns:xsl='http://www.w3.org/1999/XSL/Transform' version='1.0'>
      <xsl:template match='/'>
        <Configure>
          <xsl:for-each select='/expr/list/attrs'>
            <Call name='addWebApplication'>
              <Arg><xsl:value-of select=\"attr[@name = 'path']/string/@value\" /></Arg>
              <Arg><xsl:value-of select=\"attr[@name = 'war']/path/@value\" /></Arg>
            </Call>
          </xsl:for-each>
        </Configure>
      </xsl:template>
    </xsl:stylesheet>
  ";

  servlets = builtins.toXML [ 3 
    { path = "/bugtracker"; war = jira + "/lib/atlassian-jira.war"; }
    { path = "/wiki"; war = uberwiki + "/uberwiki.war"; }
  ];
})

Example 5.7. XML representation produced by toXML

<?xml version='1.0' encoding='utf-8'?>
<expr>
  <list>
    <attrs>
      <attr name="path">
        <string value="/bugtracker" />
      </attr>
      <attr name="war">
        <path value="/nix/store/d1jh9pasa7k2...-jira/lib/atlassian-jira.war" />
      </attr>
    </attrs>
    <attrs>
      <attr name="path">
        <string value="/wiki" />
      </attr>
      <attr name="war">
        <path value="/nix/store/y6423b1yi4sx...-uberwiki/uberwiki.war" />
      </attr>
    </attrs>
  </list>
</expr>

builtins.trace e1 e2

Evaluate e1 and print its abstract syntax representation on standard error. Then return e2. This function is useful for debugging.

5.3. The standard environment

The standard environment is used by passing it as an input called stdenv to the derivation, and then doing

source $stdenv/setup

at the top of the builder.

Apart from adding the aforementioned commands to the PATH, setup also does the following:

  • All input packages specified in the buildInputs environment variable have their /bin subdirectory added to PATH, their /include subdirectory added to the C/C++ header file search path, and their /lib subdirectory added to the linker search path. This can be extended. For instance, when the pkgconfig package is used, the subdirectory /lib/pkgconfig of each input is added to the PKG_CONFIG_PATH environment variable.

  • The environment variable NIX_CFLAGS_STRIP is set so that the compiler strips debug information from object files. This can be disabled by setting NIX_STRIP_DEBUG to 0.

The setup script also exports a function called genericBuild that knows how to build typical Autoconf-style packages. It can be customised to perform builds for any type of package. It is advisable to use genericBuild since it provides facilities that are almost always useful such as unpacking of sources, patching of sources, nested logging, etc.

The definitive, up-to-date documentation of the generic builder is the source itself, which resides in pkgs/stdenv/generic/setup.sh.

5.3.1. Customising the generic builder

The operation of the generic builder can be modified in many places by setting certain variables. These hook variables are typically set to the name of some shell function defined by you. For instance, to perform some additional steps after make install you would set the postInstall variable:

postInstall=myPostInstall

myPostInstall() {
    mkdir $out/share/extra
    cp extrafiles/* $out/share/extra
}

5.3.2. Debugging failed builds

At the beginning of each phase, the set of all shell variables is written to the file env-vars at the top-level build directory. This is useful for debugging: it allows you to recreate the environment in which a build was performed. For instance, if a build fails, then assuming you used the -K flag, you can go to the output directory and switch to the environment of the builder:

$ nix-build -K ./foo.nix
... fails, keeping build directory `/tmp/nix-1234-0'

$ cd /tmp/nix-1234-0

$ source env-vars

(edit some files...)

$ make

(execution continues with the same GCC, make, etc.)



[4] In fact, it can be written in any language, but typically it's a bash shell script.

[5] Actually, it's initialised to /path-not-set to prevent Bash from setting it to a default value.

[6] How does it work? setup tries to source the file pkg/nix-support/setup-hook of all dependencies. These “setup hooks” can then set up whatever environment variables they want; for instance, the setup hook for Perl sets the PERL5LIB environment variable to contain the lib/site_perl directories of all inputs.

[7] It's parsed as an expression that selects the attribute sh from the variable builder.

[8] Actually, Nix detects infinite recursion in this case and aborts (infinite recursion encountered).

[9] To figure out your platform identifier, look at the line Checking for the canonical Nix system name in the output of Nix's configure script.

Chapter 6. Setting Up Distributed Builds

Nix supports distributed builds: a local Nix installation can forward Nix builds to other machines over the network. This allows multiple builds to be performed in parallel (thus improving performance) and allows Nix to perform multi-platform builds in a semi-transparent way. For instance, if you perform a build for a powerpc-darwin on an i686-linux machine, Nix can automatically forward the build to a powerpc-darwin machine, if available.

You can enable distributed builds by setting the environment variable NIX_BUILD_HOOK to point to a program that Nix will call whenever it wants to build a derivation. The build hook (typically a shell or Perl script) can decline the build, in which Nix will perform it in the usual way if possible, or it can accept it, in which case it is responsible for somehow getting the inputs of the build to another machine, doing the build there, and getting the results back. The details of the build hook protocol are described in the documentation of the NIX_BUILD_HOOK variable.

Example 6.1. Remote machine configuration: remote-systems.conf

nix@mcflurry.labs.cs.uu.nl  powerpc-darwin  /home/nix/.ssh/id_quarterpounder_auto  2
nix@scratchy.labs.cs.uu.nl  i686-linux      /home/nix/.ssh/id_scratchy_auto        8 1 kvm
nix@itchy.labs.cs.uu.nl     i686-linux      /home/nix/.ssh/id_scratchy_auto        8 2
nix@poochie.labs.cs.uu.nl   i686-linux      /home/nix/.ssh/id_scratchy_auto        8 2 kvm perf

Nix ships with a build hook that should be suitable for most purposes. It uses ssh and nix-copy-closure to copy the build inputs and outputs and perform the remote build. To use it, you should set NIX_BUILD_HOOK to prefix/libexec/nix/build-remote.pl. You should also define a list of available build machines and point the environment variable NIX_REMOTE_SYSTEMS to it. An example configuration is shown in Example 6.1, “Remote machine configuration: remote-systems.conf. Each line in the file specifies a machine, with the following bits of information:

  1. The name of the remote machine, with optionally the user under which the remote build should be performed. This is actually passed as an argument to ssh, so it can be an alias defined in your ~/.ssh/config.

  2. A comma-separated list of Nix platform type identifiers, such as powerpc-darwin. It is possible for a machine to support multiple platform types, e.g., i686-linux,x86_64-linux.

  3. The SSH private key to be used to log in to the remote machine. Since builds should be non-interactive, this key should not have a passphrase!

  4. The maximum number of builds that build-remote.pl will execute in parallel on the machine. Typically this should be equal to the number of CPU cores. For instance, the machine itchy in the example will execute up to 8 builds in parallel.

  5. The “speed factor”, indicating the relative speed of the machine. If there are multiple machines of the right type, Nix will prefer the fastest, taking load into account.

  6. A comma-separated list of supported features. If a derivation has the requiredSystemFeatures attribute, then build-remote.pl will only perform the derivation on a machine that has the specified features. For instance, the attribute

    requiredSystemFeatures = [ "kvm" ];  
    

    will cause the build to be performed on a machine that has the kvm feature (i.e., scratchy in the example above).

  7. A comma-separated list of mandatory features. A machine will only be used to build a derivation if all of the machine’s mandatory features appear in the derivation’s requiredSystemFeatures attribute. Thus, in the example, the machine poochie will only do derivations that have requiredSystemFeatures set to ["kvm" "perf"] or ["perf"].

You should also set up the environment variable NIX_CURRENT_LOAD to point at a directory (e.g., /var/run/nix/current-load) that build-remote.pl uses to remember how many builds it is currently executing remotely. It doesn't look at the actual load on the remote machine, so if you have multiple instances of Nix running, they should use the same NIX_CURRENT_LOAD file. Maybe in the future build-remote.pl will look at the actual remote load.

Appendix A. Command Reference

Table of Contents

A.1. Common options
A.2. Common environment variables
A.3. Nix configuration file
A.4. Main commands
nix-env — manipulate or query Nix user environments
nix-instantiate — instantiate store derivations from Nix expressions
nix-store — manipulate or query the Nix store
A.5. Utilities
nix-build — build a Nix expression
nix-channel — manage Nix channels
nix-collect-garbage — delete unreachable store paths
nix-copy-closure — copy a closure to or from a remote machine via SSH
nix-hash — compute the cryptographic hash of a path
nix-install-package — install a Nix Package file
nix-prefetch-url — copy a file from a URL into the store and print its hash
nix-pull — pull substitutes from a network cache
nix-push — push store paths onto a network cache
nix-worker — Nix multi-user support daemon

A.1. Common options

Most Nix commands accept the following command-line options:

--help

Prints out a summary of the command syntax and exits.

--version

Prints out the Nix version number on standard output and exits.

--verbose, -v

Increases the level of verbosity of diagnostic messages printed on standard error. For each Nix operation, the information printed on standard output is well-defined; any diagnostic information is printed on standard error, never on standard output.

This option may be specified repeatedly. Currently, the following verbosity levels exist:

0

“Errors only”: only print messages explaining why the Nix invocation failed.

1

“Informational”: print useful messages about what Nix is doing. This is the default.

2

“Talkative”: print more informational messages.

3

“Chatty”: print even more informational messages.

4

“Debug”: print debug information.

5

“Vomit”: print vast amounts of debug information.

--no-build-output, -Q

By default, output written by builders to standard output and standard error is echoed to the Nix command's standard error. This option suppresses this behaviour. Note that the builder's standard output and error are always written to a log file in prefix/nix/var/log/nix.

--max-jobs, -j

Sets the maximum number of build jobs that Nix will perform in parallel to the specified number. The default is specified by the build-max-jobs configuration setting, which itself defaults to 1. A higher value is useful on SMP systems or to exploit I/O latency.

--cores

Sets the value of the NIX_BUILD_CORES environment variable in the invocation of builders. Builders can use this variable at their discretion to control the maximum amount of parallelism. For instance, in Nixpkgs, if the derivation attribute enableParallelBuilding is set to true, the builder passes the -jN flag to GNU Make. It defaults to the value of the build-cores configuration setting, if set, or 1 otherwise. The value 0 means that the builder should use all available CPU cores in the system.

--max-silent-time

Sets the maximum number of seconds that a builder can go without producing any data on standard output or standard error. The default is specified by the build-max-silent-time configuration setting. 0 means no time-out.

--timeout

Sets the maximum number of seconds that a builder can run. The default is specified by the build-timeout configuration setting. 0 means no timeout.

--keep-going, -k

Keep going in case of failed builds, to the greatest extent possible. That is, if building an input of some derivation fails, Nix will still build the other inputs, but not the derivation itself. Without this option, Nix stops if any build fails (except for builds of substitutes), possibly killing builds in progress (in case of parallel or distributed builds).

--keep-failed, -K

Specifies that in case of a build failure, the temporary directory (usually in /tmp) in which the build takes place should not be deleted. The path of the build directory is printed as an informational message.

--fallback

Whenever Nix attempts to build a derivation for which substitutes are known for each output path, but realising the output paths through the substitutes fails, fall back on building the derivation.

The most common scenario in which this is useful is when we have registered substitutes in order to perform binary distribution from, say, a network repository. If the repository is down, the realisation of the derivation will fail. When this option is specified, Nix will build the derivation instead. Thus, installation from binaries falls back on nstallation from source. This option is not the default since it is generally not desirable for a transient failure in obtaining the substitutes to lead to a full build from source (with the related consumption of resources).

--readonly-mode

When this option is used, no attempt is made to open the Nix database. Most Nix operations do need database access, so those operations will fail.

--log-type type

This option determines how the output written to standard error is formatted. Nix’s diagnostic messages are typically nested. For instance, when tracing Nix expression evaluation (nix-env -vvvvv, messages from subexpressions are nested inside their parent expressions. Nix builder output is also often nested. For instance, the Nix Packages generic builder nests the various build tasks (unpack, configure, compile, etc.), and the GNU Make in stdenv-linux has been patched to provide nesting for recursive Make invocations.

type can be one of the following:

pretty

Pretty-print the output, indicating different nesting levels using spaces. This is the default.

escapes

Indicate nesting using escape codes that can be interpreted by the nix-log2xml tool in the Nix source distribution. The resulting XML file can be fed into the log2html.xsl stylesheet to create an HTML file that can be browsed interactively, using Javascript to expand and collapse parts of the output.

flat

Remove all nesting.

--arg name value

This option is accepted by nix-env, nix-instantiate and nix-build. When evaluating Nix expressions, the expression evaluator will automatically try to call functions that it encounters. It can automatically call functions for which every argument has a default value (e.g., { argName ? defaultValue }: ...). With --arg, you can also call functions that have arguments without a default value (or override a default value). That is, if the evaluator encounters a function with an argument named name, it will call it with value value.

For instance, the file pkgs/top-level/all-packages.nix in Nixpkgs is actually a function:

{ # The system (e.g., `i686-linux') for which to build the packages.
  system ? builtins.currentSystem
  ...
}: ...

So if you call this Nix expression (e.g., when you do nix-env -i pkgname), the function will be called automatically using the value builtins.currentSystem for the system argument. You can override this using --arg, e.g., nix-env -i pkgname --arg system \"i686-freebsd\". (Note that since the argument is a Nix string literal, you have to escape the quotes.)

--argstr name value

This option is like --arg, only the value is not a Nix expression but a string. So instead of --arg system \"i686-linux\" (the outer quotes are to keep the shell happy) you can say --argstr system i686-linux.

--attr / -A attrPath

In nix-env, nix-instantiate and nix-build, --attr allows you to select an attribute from the top-level Nix expression being evaluated. The attribute path attrPath is a sequence of attribute names separated by dots. For instance, given a top-level Nix expression e, the attribute path xorg.xorgserver would cause the expression e.xorg.xorgserver to be used. See nix-env --install for some concrete examples.

In addition to attribute names, you can also specify array indices. For instance, the attribute path foo.3.bar selects the bar attribute of the fourth element of the array in the foo attribute of the top-level expression.

--show-trace

Causes Nix to print out a stack trace in case of Nix expression evaluation errors.

-I path

Add a path to the Nix expression search path. See the NIX_PATH environment variable for details. Paths added through -I take precedence over NIX_PATH.

A.2. Common environment variables

Most Nix commands interpret the following environment variables:

NIX_PATH

A colon-separated list of directories used to look up Nix expressions enclosed in angle brackets (i.e., <path>). For instance, the value

/home/eelco/Dev:/etc/nixos

will cause Nix to look for paths relative to /home/eelco/Dev and /etc/nixos, in that order. It is also possible to match paths against a prefix. For example, the value

nixpkgs=/home/eelco/Dev/nixpkgs-branch:/etc/nixos

will cause Nix to search for <nixpkgs/path> in /home/eelco/Dev/nixpkgs-branch/path and /etc/nixos/nixpkgs/path.

The search path can be extended using the -I option, which takes precedence over NIX_PATH.

NIX_IGNORE_SYMLINK_STORE

Normally, the Nix store directory (typically /nix/store) is not allowed to contain any symlink components. This is to prevent “impure” builds. Builders sometimes “canonicalise” paths by resolving all symlink components. Thus, builds on different machines (with /nix/store resolving to different locations) could yield different results. This is generally not a problem, except when builds are deployed to machines where /nix/store resolves differently. If you are sure that you’re not going to do that, you can set NIX_IGNORE_SYMLINK_STORE to 1.

Note that if you’re symlinking the Nix store so that you can put it on another file system than the root file system, on Linux you’re better off using bind mount points, e.g.,

$ mkdir /nix   
$ mount -o bind /mnt/otherdisk/nix /nix

Consult the mount(8) manual page for details.

NIX_STORE_DIR

Overrides the location of the Nix store (default prefix/store).

NIX_DATA_DIR

Overrides the location of the Nix static data directory (default prefix/share).

NIX_LOG_DIR

Overrides the location of the Nix log directory (default prefix/log/nix).

NIX_STATE_DIR

Overrides the location of the Nix state directory (default prefix/var/nix).

NIX_DB_DIR

Overrides the location of the Nix database (default $NIX_STATE_DIR/db, i.e., prefix/var/nix/db).

NIX_CONF_DIR

Overrides the location of the Nix configuration directory (default prefix/etc/nix).

NIX_LOG_TYPE

Equivalent to the --log-type option.

TMPDIR

Use the specified directory to store temporary files. In particular, this includes temporary build directories; these can take up substantial amounts of disk space. The default is /tmp.

NIX_BUILD_HOOK

Specifies the location of the build hook, which is a program (typically some script) that Nix will call whenever it wants to build a derivation. This is used to implement distributed builds (see Chapter 6, Setting Up Distributed Builds).

NIX_REMOTE

This variable should be set to daemon if you want to use the Nix daemon to executed Nix operations, which is necessary in multi-user Nix installations. Otherwise, it should be left unset.

NIX_OTHER_STORES

This variable contains the paths of remote Nix installations from whichs paths can be copied, separated by colons. See Section 4.6, “Sharing packages between machines” for details. Each path should be the /nix directory of a remote Nix installation (i.e., not the /nix/store directory). The paths are subject to globbing, so you can set it so something like /var/run/nix/remote-stores/*/nix and mount multiple remote filesystems in /var/run/nix/remote-stores.

Note that if you’re building through the Nix daemon, the only setting for this variable that matters is the one that the nix-worker process uses. So if you want to change it, you have to restart the daemon.

GC_INITIAL_HEAP_SIZE

If Nix has been configured to use the Boehm garbage collector, this variable sets the initial size of the heap in bytes. It defaults to 384 MiB. Setting it to a low value reduces memory consumption, but will increase runtime due to the overhead of garbage collection.

A.3. Nix configuration file

A number of persistent settings of Nix are stored in the file sysconfdir/nix/nix.conf. This file is a list of name = value pairs, one per line. Comments start with a # character. An example configuration file is shown in Example A.1, “Nix configuration file”.

Example A.1. Nix configuration file

gc-keep-outputs = true       # Nice for developers
gc-keep-derivations = true   # Idem
env-keep-derivations = false

The following variables are currently available:

gc-keep-outputs

If true, the garbage collector will keep the outputs of non-garbage derivations. If false (default), outputs will be deleted unless they are GC roots themselves (or reachable from other roots).

In general, outputs must be registered as roots separately. However, even if the output of a derivation is registered as a root, the collector will still delete store paths that are used only at build time (e.g., the C compiler, or source tarballs downloaded from the network). To prevent it from doing so, set this option to true.

gc-keep-derivations

If true (default), the garbage collector will keep the derivations from which non-garbage store paths were built. If false, they will be deleted unless explicitly registered as a root (or reachable from other roots).

Keeping derivation around is useful for querying and traceability (e.g., it allows you to ask with what dependencies or options a store path was built), so by default this option is on. Turn it off to safe a bit of disk space (or a lot if gc-keep-outputs is also turned on).

env-keep-derivations

If false (default), derivations are not stored in Nix user environments. That is, the derivation any build-time-only dependencies may be garbage-collected.

If true, when you add a Nix derivation to a user environment, the path of the derivation is stored in the user environment. Thus, the derivation will not be garbage-collected until the user environment generation is deleted (nix-env --delete-generations). To prevent build-time-only dependencies from being collected, you should also turn on gc-keep-outputs.

The difference between this option and gc-keep-derivations is that this one is “sticky”: it applies to any user environment created while this option was enabled, while gc-keep-derivations only applies at the moment the garbage collector is run.

build-max-jobs

This option defines the maximum number of jobs that Nix will try to build in parallel. The default is 1. You should generally set it to the number of CPUs in your system (e.g., 2 on a Athlon 64 X2). It can be overriden using the --max-jobs (-j) command line switch.

build-cores

Sets the value of the NIX_BUILD_CORES environment variable in the invocation of builders. Builders can use this variable at their discretion to control the maximum amount of parallelism. For instance, in Nixpkgs, if the derivation attribute enableParallelBuilding is set to true, the builder passes the -jN flag to GNU Make. It can be overriden using the --cores command line switch and defaults to 1. The value 0 means that the builder should use all available CPU cores in the system.

build-max-silent-time

This option defines the maximum number of seconds that a builder can go without producing any data on standard output or standard error. This is useful (for instance in a automated build system) to catch builds that are stuck in an infinite loop, or to catch remote builds that are hanging due to network problems. It can be overriden using the --max-silent-time command line switch.

The value 0 means that there is no timeout. This is also the default.

build-timeout

This option defines the maximum number of seconds that a builder can run. This is useful (for instance in a automated build system) to catch builds that are stuck in an infinite loop but keep writing to their standard output or standard error. It can be overriden using the --timeout command line switch.

The value 0 means that there is no timeout. This is also the default.

build-users-group

This options specifies the Unix group containing the Nix build user accounts. In multi-user Nix installations, builds should not be performed by the Nix account since that would allow users to arbitrarily modify the Nix store and database by supplying specially crafted builders; and they cannot be performed by the calling user since that would allow him/her to influence the build result.

Therefore, if this option is non-empty and specifies a valid group, builds will be performed under the user accounts that are a member of the group specified here (as listed in /etc/group). Those user accounts should not be used for any other purpose!

Nix will never run two builds under the same user account at the same time. This is to prevent an obvious security hole: a malicious user writing a Nix expression that modifies the build result of a legitimate Nix expression being built by another user. Therefore it is good to have as many Nix build user accounts as you can spare. (Remember: uids are cheap.)

The build users should have permission to create files in the Nix store, but not delete them. Therefore, /nix/store should be owned by the Nix account, its group should be the group specified here, and its mode should be 1775.

If the build users group is empty, builds will be performed under the uid of the Nix process (that is, the uid of the caller if NIX_REMOTE is empty, the uid under which the Nix daemon runs if NIX_REMOTE is daemon, or the uid that owns the setuid nix-worker program if NIX_REMOTE is slave). Obviously, this should not be used in multi-user settings with untrusted users.

build-use-chroot

If set to true, builds will be performed in a chroot environment, i.e., the build will be isolated from the normal file system hierarchy and will only see the Nix store, the temporary build directory, and the directories configured with the build-chroot-dirs option (such as /proc and /dev). This is useful to prevent undeclared dependencies on files in directories such as /usr/bin.

The use of a chroot requires that Nix is run as root (but you can still use the “build users” feature to perform builds under different users than root). Currently, chroot builds only work on Linux because Nix uses “bind mounts” to make the Nix store and other directories available inside the chroot.

build-use-substitutes

If set to true (default), Nix will use binary substitutes if available. This option can be disabled to force building from source.

build-chroot-dirs

When builds are performed in a chroot environment, Nix will mount (using mount --bind on Linux) some directories from the normal file system hierarchy inside the chroot. These are the Nix store, the temporary build directory (usually /tmp/nix-pid-number) and the directories listed here. The default is dev /proc. Files in /dev (such as /dev/null) are needed by many builds, and some files in /proc may also be needed occasionally.

The value used on NixOS is

build-use-chroot = /dev /proc /bin

to make the /bin/sh symlink available (which is still needed by many builders).

build-cache-failures

If set to true, Nix will “cache” build failures, meaning that it will remember (in its database) that a derivation previously failed. If you then try to build the derivation again, Nix will immediately fail rather than perform the build again. Failures in fixed-output derivations (such as fetchurl calls) are never cached. The “failed” status of a derivation can be cleared using nix-store --clear-failed-paths. By default, failure caching is disabled.

system

This option specifies the canonical Nix system name of the current installation, such as i686-linux or powerpc-darwin. Nix can only build derivations whose system attribute equals the value specified here. In general, it never makes sense to modify this value from its default, since you can use it to ‘lie’ about the platform you are building on (e.g., perform a Mac OS build on a Linux machine; the result would obviously be wrong). It only makes sense if the Nix binaries can run on multiple platforms, e.g., ‘universal binaries’ that run on powerpc-darwin and i686-darwin.

It defaults to the canonical Nix system name detected by configure at build time.

fsync-metadata

If set to true, changes to the Nix store metadata (in /nix/var/nix/db) are synchronously flushed to disk. This improves robustness in case of system crashes, but reduces performance. The default is true.

A.4. Main commands

Name

nix-env — manipulate or query Nix user environments

Synopsis

nix-env [--help] [--version] [--verbose...] [-v...] [--no-build-output] [-Q] [ { --max-jobs | -j } number ] [ --cores number ] [ --max-silent-time number ] [ --timeout number ] [--keep-going] [-k] [--keep-failed] [-K] [--fallback] [--readonly-mode] [--log-type type] [--show-trace] [ -I path ]
[--arg name value] [--argstr name value] [ { --file | -f } path ] [ { --profile | -p } path ] [ --system-filter system ] [--dry-run] operation [options...] [arguments...]

Description

The command nix-env is used to manipulate Nix user environments. User environments are sets of software packages available to a user at some point in time. In other words, they are a synthesised view of the programs available in the Nix store. There may be many user environments: different users can have different environments, and individual users can switch between different environments.

nix-env takes exactly one operation flag which indicates the subcommand to be performed. These are documented below.

Common options

This section lists the options that are common to all operations. These options are allowed for every subcommand, though they may not always have an effect. See also Section A.1, “Common options”.

--file, -f

Specifies the Nix expression (designated below as the active Nix expression) used by the --install, --upgrade, and --query --available operations to obtain derivations. The default is ~/.nix-defexpr.

--profile, -p

Specifies the profile to be used by those operations that operate on a profile (designated below as the active profile). A profile is sequence of user environments called generations, one of which is the current generation. The default profile is the target of the symbolic link ~/.nix-profile (see below).

--dry-run

For the --install, --upgrade, --uninstall, --switch-generation and --rollback operations, this flag will cause nix-env to print what would be done if this flag had not been specified, without actually doing it.

--dry-run also prints out which paths will be substituted (i.e., downloaded) and which paths will be built from source (because no substitute is available).

--system-filter system

By default, operations such as --query --available show derivations matching any platform. This option allows you to use derivations for the specified platform system.

Files

~/.nix-defexpr

A directory that contains the default Nix expressions used by the --install, --upgrade, and --query --available operations to obtain derivations. The --file option may be used to override this default.

The Nix expressions in this directory are combined into a single attribute set, with each file as an attribute that has the name of the file. Thus, if ~/.nix-defexpr contains two files, foo and bar, then the default Nix expression will essentially be

{
  foo = import ~/.nix-defexpr/foo;
  bar = import ~/.nix-defexpr/bar;
}

The command nix-channel places symlinks to the downloaded Nix expressions from each subscribed channel in this directory.

~/.nix-profile

A symbolic link to the user's current profile. By default, this symlink points to prefix/var/nix/profiles/default. The PATH environment variable should include ~/.nix-profile/bin for the user environment to be visible to the user.

Operation --install

Synopsis

nix-env { --install | -i } [ { --prebuilt-only | -b } ] [ { --attr | -A } ] [--from-expression] [-E] [--from-profile path] [ --preserve-installed | -P ] args...

Description

The install operation creates a new user environment, based on the current generation of the active profile, to which a set of store paths described by args is added. The arguments args map to store paths in a number of possible ways:

  • By default, args is a set of derivation names denoting derivations in the active Nix expression. These are realised, and the resulting output paths are installed. Currently installed derivations with a name equal to the name of a derivation being added are removed unless the option --preserve-installed is specified.

    If there are multiple derivations matching a name in args that have the same name (e.g., gcc-3.3.6 and gcc-4.1.1), then the derivation with the highest priority is used. A derivation can define a priority by declaring the meta.priority attribute. This attribute should be a number, with a higher value denoting a lower priority. The default priority is 0.

    If there are multiple matching derivations with the same priority, then the derivation with the highest version will be installed.

    You can force the installation of multiple derivations with the same name by being specific about the versions. For instance, nix-env -i gcc-3.3.6 gcc-4.1.1 will install both version of GCC (and will probably cause a user environment conflict!).

  • If --attr (-A) is specified, the arguments are attribute paths that select attributes from the top-level Nix expression. This is faster than using derivation names and unambiguous. To find out the attribute paths of available packages, use nix-env -qaP '*'.

  • If --from-profile path is given, args is a set of names denoting installed store paths in the profile path. This is an easy way to copy user environment elements from one profile to another.

  • If --from-expression is given, args are Nix functions that are called with the active Nix expression as their single argument. The derivations returned by those function calls are installed. This allows derivations to be specified in a unambiguous way, which is necessary if there are multiple derivations with the same name.

  • If args are store derivations, then these are realised, and the resulting output paths are installed.

  • If args are store paths that are not store derivations, then these are realised and installed.

Flags

--prebuild-only / -b

Use only derivations for which a substitute is registered, i.e., there is a pre-built binary available that can be downloaded in lieu of building the derivation. Thus, no packages will be built from source.

--preserve-installed, -P

Do not remove derivations with a name matching one of the derivations being installed. Usually, trying to have two versions of the same package installed in the same generation of a profile will lead to an error in building the generation, due to file name clashes between the two versions. However, this is not the case for all packages.

Examples

To install a specific version of gcc from the active Nix expression:

$ nix-env --install gcc-3.3.2
installing `gcc-3.3.2'
uninstalling `gcc-3.1'

Note the the previously installed version is removed, since --preserve-installed was not specified.

To install an arbitrary version:

$ nix-env --install gcc
installing `gcc-3.3.2'

To install using a specific attribute:

$ nix-env -i -A gcc40mips
$ nix-env -i -A xorg.xorgserver

To install all derivations in the Nix expression foo.nix:

$ nix-env -f ~/foo.nix -i '*'

To copy the store path with symbolic name gcc from another profile:

$ nix-env -i --from-profile /nix/var/nix/profiles/foo -i gcc

To install a specific store derivation (typically created by nix-instantiate):

$ nix-env -i /nix/store/fibjb1bfbpm5mrsxc4mh2d8n37sxh91i-gcc-3.4.3.drv

To install a specific output path:

$ nix-env -i /nix/store/y3cgx0xj1p4iv9x0pnnmdhr8iyg741vk-gcc-3.4.3

To install from a Nix expression specified on the command-line:

$ nix-env -f ./foo.nix -i -E \
    'f: (f {system = "i686-linux";}).subversionWithJava'

I.e., this evaluates to (f: (f {system = "i686-linux";}).subversionWithJava) (import ./foo.nix), thus selecting the subversionWithJava attribute from the attribute set returned by calling the function defined in ./foo.nix.

A dry-run tells you which paths will be downloaded or built from source:

$ nix-env -f pkgs/top-level/all-packages.nix -i f-spot --dry-run
(dry run; not doing anything)
installing `f-spot-0.0.10'
the following derivations will be built:
  /nix/store/0g63jv9aagwbgci4nnzs2dkxqz84kdja-libgnomeprintui-2.12.1.tar.bz2.drv
  /nix/store/0gfarvxq6sannsdw8a1ir40j1ys2mqb4-ORBit2-2.14.2.tar.bz2.drv
  /nix/store/0i9gs5zc04668qiy60ga2rc16abkj7g8-sqlite-2.8.17.drv
  ...
the following paths will be substituted:
  /nix/store/8zbipvm4gp9jfqh9nnk1n3bary1a37gs-perl-XML-Parser-2.34
  /nix/store/b8a2bg7gnyvvvjjibp4axg9x1hzkw36c-mono-1.1.4
  ...

Operation --upgrade

Synopsis

nix-env { --upgrade | -u } [ { --prebuilt-only | -b } ] [ { --attr | -A } ] [--from-expression] [-E] [--from-profile path] [ --lt | --leq | --eq | --always ] args...

Description

The upgrade operation creates a new user environment, based on the current generation of the active profile, in which all store paths are replaced for which there are newer versions in the set of paths described by args. Paths for which there are no newer versions are left untouched; this is not an error. It is also not an error if an element of args matches no installed derivations.

For a description of how args is mapped to a set of store paths, see --install. If args describes multiple store paths with the same symbolic name, only the one with the highest version is installed.

Flags

--lt

Only upgrade a derivation to newer versions. This is the default.

--leq

In addition to upgrading to newer versions, also “upgrade” to derivations that have the same version. Version are not a unique identification of a derivation, so there may be many derivations that have the same version. This flag may be useful to force “synchronisation” between the installed and available derivations.

--eq

Only “upgrade” to derivations that have the same version. This may not seem very useful, but it actually is, e.g., when there is a new release of Nixpkgs and you want to replace installed applications with the same versions built against newer dependencies (to reduce the number of dependencies floating around on your system).

--always

In addition to upgrading to newer versions, also “upgrade” to derivations that have the same or a lower version. I.e., derivations may actually be downgraded depending on what is available in the active Nix expression.

For the other flags, see --install.

Examples

$ nix-env --upgrade gcc
upgrading `gcc-3.3.1' to `gcc-3.4'

$ nix-env -u gcc-3.3.2 --always (switch to a specific version)
upgrading `gcc-3.4' to `gcc-3.3.2'

$ nix-env --upgrade pan
(no upgrades available, so nothing happens)

$ nix-env -u '*' (try to upgrade everything)
upgrading `hello-2.1.2' to `hello-2.1.3'
upgrading `mozilla-1.2' to `mozilla-1.4'

Versions

The upgrade operation determines whether a derivation y is an upgrade of a derivation x by looking at their respective name attributes. The names (e.g., gcc-3.3.1 are split into two parts: the package name (gcc), and the version (3.3.1). The version part starts after the first dash not following by a letter. x is considered an upgrade of y if their package names match, and the version of y is higher that that of x.

The versions are compared by splitting them into contiguous components of numbers and letters. E.g., 3.3.1pre5 is split into [3, 3, 1, "pre", 5]. These lists are then compared lexicographically (from left to right). Corresponding components a and b are compared as follows. If they are both numbers, integer comparison is used. If a is an empty string and b is a number, a is considered less than b. The special string component pre (for pre-release) is considered to be less than other components. String components are considered less than number components. Otherwise, they are compared lexicographically (i.e., using case-sensitive string comparison).

This is illustrated by the following examples:

1.0 < 2.3
2.1 < 2.3
2.3 = 2.3
2.5 > 2.3
3.1 > 2.3
2.3.1 > 2.3
2.3.1 > 2.3a
2.3pre1 < 2.3
2.3pre3 < 2.3pre12
2.3a < 2.3c
2.3pre1 < 2.3c
2.3pre1 < 2.3q

Operation --uninstall

Synopsis

nix-env { --uninstall | -e } drvnames...

Description

The uninstall operation creates a new user environment, based on the current generation of the active profile, from which the store paths designated by the symbolic names names are removed.

Examples

$ nix-env --uninstall gcc
$ nix-env -e '*' (remove everything)

Operation --set-flag

Synopsis

nix-env --set-flag name value drvnames...

Description

The --set-flag operation allows meta attributes of installed packages to be modified. There are several attributes that can be usefully modified, because they affect the behaviour of nix-env or the user environment build script:

  • priority can be changed to resolve filename clashes. The user environment build script uses the meta.priority attribute of derivations to resolve filename collisions between packages. Lower priority values denote a higher priority. For instance, the GCC wrapper package and the Binutils package in Nixpkgs both have a file bin/ld, so previously if you tried to install both you would get a collision. Now, on the other hand, the GCC wrapper declares a higher priority than Binutils, so the former’s bin/ld is symlinked in the user environment.

  • keep can be set to true to prevent the package from being upgraded or replaced. This is useful if you want to hang on to an older version of a package.

  • active can be set to false to “disable” the package. That is, no symlinks will be generated to the files of the package, but it remains part of the profile (so it won’t be garbage-collected). It can be set back to true to re-enable the package.

Examples

To prevent the currently installed Firefox from being upgraded:

$ nix-env --set-flag keep true firefox

After this, nix-env -u will ignore Firefox.

To disable the currently installed Firefox, then install a new Firefox while the old remains part of the profile:

$ nix-env -q \*
firefox-2.0.0.9 (the current one)

$ nix-env --preserve-installed -i firefox-2.0.0.11
installing `firefox-2.0.0.11'
building path(s) `/nix/store/myy0y59q3ig70dgq37jqwg1j0rsapzsl-user-environment'
Collission between `/nix/store/...-firefox-2.0.0.11/bin/firefox'
  and `/nix/store/...-firefox-2.0.0.9/bin/firefox'.
(i.e., can’t have two active at the same time)

$ nix-env --set-flag active false firefox
setting flag on `firefox-2.0.0.9'

$ nix-env --preserve-installed -i firefox-2.0.0.11
installing `firefox-2.0.0.11'

$ nix-env -q \*
firefox-2.0.0.11 (the enabled one)
firefox-2.0.0.9 (the disabled one)

To make files from binutils take precedence over files from gcc:

$ nix-env --set-flag priority 5 binutils
$ nix-env --set-flag priority 10 gcc

Operation --query

Synopsis

nix-env { --query | -q } [ --installed | --available | -a ]
[ { --status | -s } ] [ { --attr-path | -P } ] [--no-name] [ { --compare-versions | -c } ] [--system] [--drv-path] [--out-path] [--description] [--meta]
[--xml] [ { --prebuilt-only | -b } ] [ { --attr | -A } attribute-path ]
names...

Description

The query operation displays information about either the store paths that are installed in the current generation of the active profile (--installed), or the derivations that are available for installation in the active Nix expression (--available). It only prints information about derivations whose symbolic name matches one of names. The wildcard * shows all derivations.

The derivations are sorted by their name attributes.

Source selection

The following flags specify the set of things on which the query operates.

--installed

The query operates on the store paths that are installed in the current generation of the active profile. This is the default.

--available, -a

The query operates on the derivations that are available in the active Nix expression.

Queries

The following flags specify what information to display about the selected derivations. Multiple flags may be specified, in which case the information is shown in the order given here. Note that the name of the derivation is shown unless --no-name is specified.

--xml

Print the result in an XML representation suitable for automatic processing by other tools. The root element is called items, which contains a item element for each available or installed derivation. The fields discussed below are all stored in attributes of the item elements.

--prebuild-only / -b

Show only derivations for which a substitute is registered, i.e., there is a pre-built binary available that can be downloaded in lieu of building the derivation. Thus, this shows all packages that probably can be installed quickly.

--status, -s

Print the status of the derivation. The status consists of three characters. The first is I or -, indicating whether the derivation is currently installed in the current generation of the active profile. This is by definition the case for --installed, but not for --available. The second is P or -, indicating whether the derivation is present on the system. This indicates whether installation of an available derivation will require the derivation to be built. The third is S or -, indicating whether a substitute is available for the derivation.

--attr-path, -P

Print the attribute path of the derivation, which can be used to unambiguously select it using the --attr option available in commands that install derivations like nix-env --install.

--no-name

Suppress printing of the name attribute of each derivation.

--compare-versions / -c

Compare installed versions to available versions, or vice versa (if --available is given). This is useful for quickly seeing whether upgrades for installed packages are available in a Nix expression. A column is added with the following meaning:

< version

A newer version of the package is available or installed.

= version

At most the same version of the package is available or installed.

> version

Only older versions of the package are available or installed.

- ?

No version of the package is available or installed.

--system

Print the system attribute of the derivation.

--drv-path

Print the path of the store derivation.

--out-path

Print the output path of the derivation.

--description

Print a short (one-line) description of the derivation, if available. The description is taken from the meta.description attribute of the derivation.

--meta

Print all of the meta-attributes of the derivation. This option is only available with --xml.

Examples

$ nix-env -q '*' (show installed derivations)
bison-1.875c
docbook-xml-4.2
firefox-1.0.4
MPlayer-1.0pre7
ORBit2-2.8.3
...

$ nix-env -qa '*' (show available derivations)
firefox-1.0.7
GConf-2.4.0.1
MPlayer-1.0pre7
ORBit2-2.8.3
...

$ nix-env -qas '*' (show status of available derivations)
-P- firefox-1.0.7   (not installed but present)
--S GConf-2.4.0.1   (not present, but there is a substitute for fast installation)
--S MPlayer-1.0pre3 (i.e., this is not the installed MPlayer, even though the version is the same!)
IP- ORBit2-2.8.3    (installed and by definition present)
...

(show available derivations in the Nix expression foo.nix)
$ nix-env -f ./foo.nix -qa '*'
foo-1.2.3

$ nix-env -qc '*' (compare installed versions to what’s available)
...
acrobat-reader-7.0 - ?      (package is not available at all)
autoconf-2.59      = 2.59   (same version)
firefox-1.0.4      < 1.0.7  (a more recent version is available)
...

(show info about a specific package, in XML)
$ nix-env -qa --xml --description firefox
<?xml version='1.0' encoding='utf-8'?>
<items>
  <item attrPath="0.0.firefoxWrapper"
    description="Mozilla Firefox - the browser, reloaded (with various plugins)"
    name="firefox-1.5.0.7" system="i686-linux" />
</items>

Operation --switch-profile

Synopsis

nix-env { --switch-profile | -S } {path}

Description

This operation makes path the current profile for the user. That is, the symlink ~/.nix-profile is made to point to path.

Examples

$ nix-env -S ~/my-profile

Operation --list-generations

Synopsis

nix-env --list-generations

Description

This operation print a list of all the currently existing generations for the active profile. These may be switched to using the --switch-generation operation. It also prints the creation date of the generation, and indicates the current generation.

Examples

$ nix-env --list-generations
  95   2004-02-06 11:48:24
  96   2004-02-06 11:49:01
  97   2004-02-06 16:22:45
  98   2004-02-06 16:24:33   (current)

Operation --delete-generations

Synopsis

nix-env --delete-generations generations...

Description

This operation deletes the specified generations of the current profile. The generations can be a list of generation numbers, or the special value old to delete all non-current generations. Periodically deleting old generations is important to make garbage collection effective.

Examples

$ nix-env --delete-generations 3 4 8

$ nix-env -p other_profile --delete-generations old

Operation --switch-generation

Synopsis

nix-env { --switch-generation | -G } {generation}

Description

This operation makes generation number generation the current generation of the active profile. That is, if the profile is the path to the active profile, then the symlink profile is made to point to profile-generation-link, which is in turn a symlink to the actual user environment in the Nix store.

Switching will fail if the specified generation does not exist.

Examples

$ nix-env -G 42
switching from generation 50 to 42

Operation --rollback

Synopsis

nix-env --rollback

Description

This operation switches to the “previous” generation of the active profile, that is, the highest numbered generation lower than the current generation, if it exists. It is just a convenience wrapper around --list-generations and --switch-generation.

Examples

$ nix-env --rollback
switching from generation 92 to 91

$ nix-env --rolback
error: no generation older than the current (91) exists

Name

nix-instantiate — instantiate store derivations from Nix expressions

Synopsis

nix-instantiate [--help] [--version] [--verbose...] [-v...] [--no-build-output] [-Q] [ { --max-jobs | -j } number ] [ --cores number ] [ --max-silent-time number ] [ --timeout number ] [--keep-going] [-k] [--keep-failed] [-K] [--fallback] [--readonly-mode] [--log-type type] [--show-trace] [ -I path ]
[--arg name value] [ { --attr | -A } attrPath ] [--add-root path] [--indirect] [ { --parse-only | --eval-only [--strict] | --find-file } [--xml] ] files...

Description

The command nix-instantiate generates store derivations from (high-level) Nix expressions. It loads and evaluates the Nix expressions in each of files (which defaults to ./default.nix). Each top-level expression should evaluate to a derivation, a list of derivations, or a set of derivations. The paths of the resulting store derivations are printed on standard output.

If files is the character -, then a Nix expression will be read from standard input.

Most users and developers don’t need to use this command (nix-env and nix-build perform store derivation instantiation from Nix expressions automatically). It is most commonly used for implementing new deployment policies.

See also Section A.1, “Common options” for a list of common options.

Options

--add-root path, --indirect

See the corresponding options in nix-store.

--parse-only

Just parse the input files, and print their abstract syntax trees on standard output in ATerm format.

--eval-only

Just parse and evaluate the input files, and print the resulting values on standard output. No instantiation of store derivations takes place.

--find-file

Look up the given files in Nix’s search path (as specified by the NIX_PATH environment variable). If found, print the corresponding absolute paths on standard output. For instance, if NIX_PATH is nixpkgs=/home/alice/nixpkgs, then nix-instantiate --find-file nixpkgs/default.nix will print /home/alice/nixpkgs/default.nix.

--xml

When used with --parse-only and --eval-only, print the resulting expression as an XML representation of the abstract syntax tree rather than as an ATerm. The schema is the same as that used by the toXML built-in.

--strict

When used with --eval-only, recursively evaluate list elements and attributes. Normally, such sub-expressions are left unevaluated (since the Nix expression language is lazy).

Warning

This option can cause non-termination, because lazy data structures can be infinitely large.

Examples

Instantiating store derivations from a Nix expression, and building them using nix-store:

$ nix-instantiate test.nix (instantiate)
/nix/store/cigxbmvy6dzix98dxxh9b6shg7ar5bvs-perl-BerkeleyDB-0.26.drv

$ nix-store -r $(nix-instantiate test.nix) (build)
...
/nix/store/qhqk4n8ci095g3sdp93x7rgwyh9rdvgk-perl-BerkeleyDB-0.26 (output path)

$ ls -l /nix/store/qhqk4n8ci095g3sdp93x7rgwyh9rdvgk-perl-BerkeleyDB-0.26
dr-xr-xr-x    2 eelco    users        4096 1970-01-01 01:00 lib
...

Parsing and evaluating Nix expressions:

$ echo '"foo" + "bar"' | nix-instantiate --parse-only -
OpPlus(Str("foo"),Str("bar"))

$ echo '"foo" + "bar"' | nix-instantiate --eval-only -
Str("foobar")

$ echo '"foo" + "bar"' | nix-instantiate --eval-only --xml -
<?xml version='1.0' encoding='utf-8'?>
<expr>
  <string value="foobar" />
</expr>

The difference between non-strict and strict evaluation:

$ echo 'rec { x = "foo"; y = x; }' | nix-instantiate --eval-only --xml -
...
    <attr name="x">
      <string value="foo" />
    </attr>
    <attr name="y">
      <unevaluated />
    </attr>
...

Note that y is left unevaluated (the XML representation doesn’t attempt to show non-normal forms).

$ echo 'rec { x = "foo"; y = x; }' | nix-instantiate --eval-only --xml --strict -
...
    <attr name="x">
      <string value="foo" />
    </attr>
    <attr name="y">
      <string value="foo" />
    </attr>
...


Name

nix-store — manipulate or query the Nix store

Synopsis

nix-store [--help] [--version] [--verbose...] [-v...] [--no-build-output] [-Q] [ { --max-jobs | -j } number ] [ --cores number ] [ --max-silent-time number ] [ --timeout number ] [--keep-going] [-k] [--keep-failed] [-K] [--fallback] [--readonly-mode] [--log-type type] [--show-trace] [ -I path ]
[--add-root path] [--indirect] operation [options...] [arguments...]

Description

The command nix-store performs primitive operations on the Nix store. You generally do not need to run this command manually.

nix-store takes exactly one operation flag which indicates the subcommand to be performed. These are documented below.

Common options

This section lists the options that are common to all operations. These options are allowed for every subcommand, though they may not always have an effect. See also Section A.1, “Common options” for a list of common options.

--add-root path

Causes the result of a realisation (--realise and --force-realise) to be registered as a root of the garbage collector (see Section 4.3.1, “Garbage collector roots”). The root is stored in path, which must be inside a directory that is scanned for roots by the garbage collector (i.e., typically in a subdirectory of /nix/var/nix/gcroots/) unless the --indirect flag is used.

If there are multiple results, then multiple symlinks will be created by sequentially numbering symlinks beyond the first one (e.g., foo, foo-2, foo-3, and so on).

--indirect

In conjunction with --add-root, this option allows roots to be stored outside of the GC roots directory. This is useful for commands such as nix-build that place a symlink to the build result in the current directory; such a build result should not be garbage-collected unless the symlink is removed.

The --indirect flag causes a uniquely named symlink to path to be stored in /nix/var/nix/gcroots/auto/. For instance,

$ nix-store --add-root /home/eelco/bla/result --indirect -r ...

$ ls -l /nix/var/nix/gcroots/auto
lrwxrwxrwx    1 ... 2005-03-13 21:10 dn54lcypm8f8... -> /home/eelco/bla/result

$ ls -l /home/eelco/bla/result
lrwxrwxrwx    1 ... 2005-03-13 21:10 /home/eelco/bla/result -> /nix/store/1r11343n6qd4...-f-spot-0.0.10

Thus, when /home/eelco/bla/result is removed, the GC root in the auto directory becomes a dangling symlink and will be ignored by the collector.

Warning

Note that it is not possible to move or rename indirect GC roots, since the symlink in the auto directory will still point to the old location.

Operation --realise

Synopsis

nix-store { --realise | -r } paths... [--dry-run]

Description

The operation --realise essentially “builds” the specified store paths. Realisation is a somewhat overloaded term:

  • If the store path is a derivation, realisation ensures that the output paths of the derivation are valid (i.e., the output path and its closure exist in the file system). This can be done in several ways. First, it is possible that the outputs are already valid, in which case we are done immediately. Otherwise, there may be substitutes that produce the outputs (e.g., by downloading them). Finally, the outputs can be produced by performing the build action described by the derivation.

  • If the store path is not a derivation, realisation ensures that the specified path is valid (i.e., it and its closure exist in the file system). If the path is already valid, we are done immediately. Otherwise, the path and any missing paths in its closure may be produced through substitutes. If there are no (succesful) subsitutes, realisation fails.

The output path of each derivation is printed on standard output. (For non-derivations argument, the argument itself is printed.)

If the --dry-run option is used, then nix-store will print on standard error a description of what packages would be built or downloaded, and then quit.

Examples

This operation is typically used to build store derivations produced by nix-instantiate:

$ nix-store -r $(nix-instantiate ./test.nix)
/nix/store/31axcgrlbfsxzmfff1gyj1bf62hvkby2-aterm-2.3.1

This is essentially what nix-build does.

Operation --gc

Synopsis

nix-store --gc [ --print-roots | --print-live | --print-dead | --delete ] [--max-freed bytes]

Description

Without additional flags, the operation --gc performs a garbage collection on the Nix store. That is, all paths in the Nix store not reachable via file system references from a set of “roots”, are deleted.

The following suboperations may be specified:

--print-roots

This operation prints on standard output the set of roots used by the garbage collector. What constitutes a root is described in Section 4.3.1, “Garbage collector roots”.

--print-live

This operation prints on standard output the set of “live” store paths, which are all the store paths reachable from the roots. Live paths should never be deleted, since that would break consistency — it would become possible that applications are installed that reference things that are no longer present in the store.

--print-dead

This operation prints out on standard output the set of “dead” store paths, which is just the opposite of the set of live paths: any path in the store that is not live (with respect to the roots) is dead.

--delete

This operation performs an actual garbage collection. All dead paths are removed from the store. This is the default.

By default, all unreachable paths are deleted. The following options control what gets deleted and in what order:

--max-freed bytes

Keep deleting paths until at least bytes bytes have been deleted, then stop.

The behaviour of the collector is also influenced by the gc-keep-outputs and gc-keep-derivations variables in the Nix configuration file.

With --delete, the collector prints the total number of freed bytes when it finishes (or when it is interrupted). With --print-dead, it prints the number of bytes that would be freed.

Examples

To delete all unreachable paths, just do:

$ nix-store --gc
deleting `/nix/store/kq82idx6g0nyzsp2s14gfsc38npai7lf-cairo-1.0.4.tar.gz.drv'
...
8825586 bytes freed (8.42 MiB)

To delete at least 100 MiBs of unreachable paths:

$ nix-store --gc --max-freed $((100 * 1024 * 1024))

Operation --delete

Synopsis

nix-store --delete [--ignore-liveness] paths...

Description

The operation --delete deletes the store paths paths from the Nix store, but only if it is safe to do so; that is, when the path is not reachable from a root of the garbage collector. This means that you can only delete paths that would also be deleted by nix-store --gc. Thus, --delete is a more targeted version of --gc.

With the option --ignore-liveness, reachability from the roots is ignored. However, the path still won’t be deleted if there are other paths in the store that refer to it (i.e., depend on it).

Example

$ nix-store --delete /nix/store/zq0h41l75vlb4z45kzgjjmsjxvcv1qk7-mesa-6.4
0 bytes freed (0.00 MiB)
error: cannot delete path `/nix/store/zq0h41l75vlb4z45kzgjjmsjxvcv1qk7-mesa-6.4' since it is still alive

Operation --query

Synopsis

nix-store { --query | -q } { --outputs | --requisites | -R | --references | --referrers | --referrers-closure | --deriver | --deriver | --graph | --tree | --binding name | --hash | --size | --roots } [--use-output] [-u] [--force-realise] [-f] paths...

Description

The operation --query displays various bits of information about the store paths . The queries are described below. At most one query can be specified. The default query is --outputs.

The paths paths may also be symlinks from outside of the Nix store, to the Nix store. In that case, the query is applied to the target of the symlink.

Common query options

--use-output, -u

For each argument to the query that is a store derivation, apply the query to the output path of the derivation instead.

--force-realise, -f

Realise each argument to the query first (see nix-store --realise).

Queries

--outputs

Prints out the output paths of the store derivations paths. These are the paths that will be produced when the derivation is built.

--requisites, -R

Prints out the closure of the store path paths.

This query has one option:

--include-outputs

Also include the output path of store derivations, and their closures.

This query can be used to implement various kinds of deployment. A source deployment is obtained by distributing the closure of a store derivation. A binary deployment is obtained by distributing the closure of an output path. A cache deployment (combined source/binary deployment, including binaries of build-time-only dependencies) is obtained by distributing the closure of a store derivation and specifying the option --include-outputs.

--references

Prints the set of references of the store paths paths, that is, their immediate dependencies. (For all dependencies, use --requisites.)

--referrers

Prints the set of referrers of the store paths paths, that is, the store paths currently existing in the Nix store that refer to one of paths. Note that contrary to the references, the set of referrers is not constant; it can change as store paths are added or removed.

--referrers-closure

Prints the closure of the set of store paths paths under the referrers relation; that is, all store paths that directly or indirectly refer to one of paths. These are all the path currently in the Nix store that are dependent on paths.

--deriver

Prints the deriver of the store paths paths. If the path has no deriver (e.g., if it is a source file), or if the deriver is not known (e.g., in the case of a binary-only deployment), the string unknown-deriver is printed.

--graph

Prints the references graph of the store paths paths in the format of the dot tool of AT&T's Graphviz package. This can be used to visualise dependency graphs. To obtain a build-time dependency graph, apply this to a store derivation. To obtain a runtime dependency graph, apply it to an output path.

--tree

Prints the references graph of the store paths paths as a nested ASCII tree. References are ordered by descending closure size; this tends to flatten the tree, making it more readable. The query only recurses into a store path when it is first encountered; this prevents a blowup of the tree representation of the graph.

--binding name

Prints the value of the attribute name (i.e., environment variable) of the store derivations paths. It is an error for a derivation to not have the specified attribute.

--hash

Prints the SHA-256 hash of the contents of the store paths paths (that is, the hash of the output of nix-store --dump on the given paths). Since the hash is stored in the Nix database, this is a fast operation.

--size

Prints the size in bytes of the contents of the store paths paths — to be precise, the size of the output of nix-store --dump on the given paths. Note that the actual disk space required by the store paths may be higher, especially on filesystems with large cluster sizes.

--roots

Prints the garbage collector roots that point, directly or indirectly, at the store paths paths.

Examples

Print the closure (runtime dependencies) of the svn program in the current user environment:

$ nix-store -qR $(which svn)
/nix/store/5mbglq5ldqld8sj57273aljwkfvj22mc-subversion-1.1.4
/nix/store/9lz9yc6zgmc0vlqmn2ipcpkjlmbi51vv-glibc-2.3.4
...

Print the build-time dependencies of svn:

$ nix-store -qR $(nix-store -qd $(which svn))
/nix/store/02iizgn86m42q905rddvg4ja975bk2i4-grep-2.5.1.tar.bz2.drv
/nix/store/07a2bzxmzwz5hp58nf03pahrv2ygwgs3-gcc-wrapper.sh
/nix/store/0ma7c9wsbaxahwwl04gbw3fcd806ski4-glibc-2.3.4.drv
... lots of other paths ...

The difference with the previous example is that we ask the closure of the derivation (-qd), not the closure of the output path that contains svn.

Show the build-time dependencies as a tree:

$ nix-store -q --tree $(nix-store -qd $(which svn))
/nix/store/7i5082kfb6yjbqdbiwdhhza0am2xvh6c-subversion-1.1.4.drv
+---/nix/store/d8afh10z72n8l1cr5w42366abiblgn54-builder.sh
+---/nix/store/fmzxmpjx2lh849ph0l36snfj9zdibw67-bash-3.0.drv
|   +---/nix/store/570hmhmx3v57605cqg9yfvvyh0nnb8k8-bash
|   +---/nix/store/p3srsbd8dx44v2pg6nbnszab5mcwx03v-builder.sh
...

Show all paths that depend on the same OpenSSL library as svn:

$ nix-store -q --referrers $(nix-store -q --binding openssl $(nix-store -qd $(which svn)))
/nix/store/23ny9l9wixx21632y2wi4p585qhva1q8-sylpheed-1.0.0
/nix/store/5mbglq5ldqld8sj57273aljwkfvj22mc-subversion-1.1.4
/nix/store/dpmvp969yhdqs7lm2r1a3gng7pyq6vy4-subversion-1.1.3
/nix/store/l51240xqsgg8a7yrbqdx1rfzyv6l26fx-lynx-2.8.5

Show all paths that directly or indirectly depend on the Glibc (C library) used by svn:

$ nix-store -q --referrers-closure $(ldd $(which svn) | grep /libc.so | awk '{print $3}')
/nix/store/034a6h4vpz9kds5r6kzb9lhh81mscw43-libgnomeprintui-2.8.2
/nix/store/15l3yi0d45prm7a82pcrknxdh6nzmxza-gawk-3.1.4
...

Note that ldd is a command that prints out the dynamic libraries used by an ELF executable.

Make a picture of the runtime dependency graph of the current user environment:

$ nix-store -q --graph ~/.nix-profile | dot -Tps > graph.ps
$ gv graph.ps

Show every garbage collector root that points to a store path that depends on svn:

$ nix-store -q --roots $(which svn)
/nix/var/nix/profiles/default-81-link
/nix/var/nix/profiles/default-82-link
/nix/var/nix/profiles/per-user/eelco/profile-97-link

Operation --add

Synopsis

nix-store --add paths...

Description

The operation --add adds the specified paths to the Nix store. It prints the resulting paths in the Nix store on standard output.

Example

$ nix-store --add ./foo.c
/nix/store/m7lrha58ph6rcnv109yzx1nk1cj7k7zf-foo.c

Operation --verify

Synopsis

nix-store --verify [--check-contents]

Description

The operation --verify verifies the internal consistency of the Nix database, and the consistency between the Nix database and the Nix store. Any inconsistencies encountered are automatically repaired. Inconsistencies are generally the result of the Nix store or database being modified by non-Nix tools, or of bugs in Nix itself.

There is one option:

--check-contents

Checks that the contents of every valid store path has not been altered by computing a SHA-256 hash of the contents and comparing it with the hash stored in the Nix database at build time. Paths that have been modified are printed out. For large stores, --check-contents is obviously quite slow.

Operation --verify-path

Synopsis

nix-store --verify-path paths...

Description

The operation --verify-paths compares the contents of the given store paths to their cryptographic hashes stored in Nix’s database. For every changed path, it prints a warning message. The exit status is 0 if no path has changed, and 1 otherwise.

Example

To verify the integrity of the svn command and all its dependencies:

$ nix-store --verify-path $(nix-store -qR $(which svn))

Operation --dump

Synopsis

nix-store --dump path

Description

The operation --dump produces a NAR (Nix ARchive) file containing the contents of the file system tree rooted at path. The archive is written to standard output.

A NAR archive is like a TAR or Zip archive, but it contains only the information that Nix considers important. For instance, timestamps are elided because all files in the Nix store have their timestamp set to 0 anyway. Likewise, all permissions are left out except for the execute bit, because all files in the Nix store have 644 or 755 permission.

Also, a NAR archive is canonical, meaning that “equal” paths always produce the same NAR archive. For instance, directory entries are always sorted so that the actual on-disk order doesn’t influence the result. This means that the cryptographic hash of a NAR dump of a path is usable as a fingerprint of the contents of the path. Indeed, the hashes of store paths stored in Nix’s database (see nix-store -q --hash) are SHA-256 hashes of the NAR dump of each store path.

NAR archives support filenames of unlimited length and 64-bit file sizes. They can contain regular files, directories, and symbolic links, but not other types of files (such as device nodes).

A Nix archive can be unpacked using nix-store --restore.

Operation --restore

Synopsis

nix-store --restore path

Description

The operation --restore unpacks a NAR archive to path, which must not already exist. The archive is read from standard input.

Operation --export

Synopsis

nix-store --export paths...

Description

The operation --export writes a serialisation of the specified store paths to standard output in a format that can be imported into another Nix store with nix-store --import. This is like nix-store --dump, except that the NAR archive produced by that command doesn’t contain the necessary meta-information to allow it to be imported into another Nix store (namely, the set of references of the path).

This command does not produce a closure of the specified paths, so if a store path references other store paths that are missing in the target Nix store, the import will fail. To copy a whole closure, do something like

$ nix-store --export $(nix-store -qR paths) > out

For an example of how --export and --import can be used, see the source of the nix-copy-closure command.

Operation --import

Synopsis

nix-store --import

Description

The operation --export reads a serialisation of a set of store paths produced by nix-store --import from standard input and adds those store paths to the Nix store. Paths that already exist in the Nix store are ignored. If a path refers to another path that doesn’t exist in the Nix store, the import fails.

Operation --optimise

Synopsis

nix-store --optimise

Description

The operation --optimise reduces Nix store disk space usage by finding identical files in the store and hard-linking them to each other. It typically reduces the size of the store by something like 25-35%. Only regular files and symlinks are hard-linked in this manner. Files are considered identical when they have the same NAR archive serialisation: that is, regular files must have the same contents and permission (executable or non-executable), and symlinks must have the same contents.

After completion, or when the command is interrupted, a report on the achieved savings is printed on standard error.

Use -vv or -vvv to get some progress indication.

Example

$ nix-store --optimise
hashing files in `/nix/store/qhqx7l2f1kmwihc9bnxs7rc159hsxnf3-gcc-4.1.1'
...
541838819 bytes (516.74 MiB) freed by hard-linking 54143 files;
there are 114486 files with equal contents out of 215894 files in total

Operation --read-log

Synopsis

nix-store { --read-log | -l } paths...

Description

The operation --read-log prints the build log of the specified store paths on standard output. The build log is whatever the builder of a derivation wrote to standard output and standard error. If a store path is not a derivation, the deriver of the store path is used.

Build logs are kept in /nix/var/log/nix/drvs. However, there is no guarantee that a build log is available for any particular store path. For instance, if the path was downloaded as a pre-built binary through a substitute, then the log is unavailable.

Example

$ nix-store -l $(which ktorrent)
building /nix/store/dhc73pvzpnzxhdgpimsd9sw39di66ph1-ktorrent-2.2.1
unpacking sources
unpacking source archive /nix/store/p8n1jpqs27mgkjw07pb5269717nzf5f8-ktorrent-2.2.1.tar.gz
ktorrent-2.2.1/
ktorrent-2.2.1/NEWS
...

Operation --dump-db

Synopsis

nix-store --dump-db

Description

The operation --dump-db writes a dump of the Nix database to standard output. It can be loaded into an empty Nix store using --load-db. This is useful for making backups and when migrating to different database schemas.

Operation --load-db

Synopsis

nix-store --load-db

Description

The operation --load-db reads a dump of the Nix database created by --dump-db from standard input and loads it into the Nix database.

Operation --print-env

Synopsis

nix-store --print-env drvpath

Description

The operation --print-env prints out the environment of a derivation in a format that can be evaluated by a shell. The command line arguments of the builder are placed in the variable _args.

Example

$ nix-store --print-env $(nix-instantiate '<nixpkgs>' -A firefox)

export src; src='/nix/store/plpj7qrwcz94z2psh6fchsi7s8yihc7k-firefox-12.0.source.tar.bz2'
export stdenv; stdenv='/nix/store/7c8asx3yfrg5dg1gzhzyq2236zfgibnm-stdenv'
export system; system='x86_64-linux'
export _args; _args='-e /nix/store/9krlzvny65gdc8s7kpb6lkx8cd02c25b-default-builder.sh'

Operation --query-failed-paths

Synopsis

nix-store --query-failed-paths

Description

If build failure caching is enabled through the build-cache-failures configuration option, the operation --query-failed-paths will print out all store paths that have failed to build.

Example

$ nix-store --query-failed-paths
/nix/store/000zi5dcla86l92jn1g997jb06sidm7x-perl-PerlMagick-6.59
/nix/store/0011iy7sfwbc1qj5a1f6ifjnbcdail8a-haskell-gitit-ghc7.0.4-0.8.1
/nix/store/001c0yn1hkh86gprvrb46cxnz3pki7q3-gamin-0.1.10

Operation --clear-failed-paths

Synopsis

nix-store --clear-failed-paths paths...

Description

If build failure caching is enabled through the build-cache-failures configuration option, the operation --clear-failed-paths clears the “failed” state of the given store paths, allowing them to be built again. This is useful if the failure was actually transient (e.g. because the disk was full).

If a path denotes a derivation, its output paths are cleared. You can provide the argument * to clear all store paths.

Example

$ nix-store --clear-failed-path /nix/store/000zi5dcla86l92jn1g997jb06sidm7x-perl-PerlMagick-6.59
$ nix-store --clear-failed-path *

A.5. Utilities

Name

nix-build — build a Nix expression

Synopsis

nix-build [--help] [--version] [--verbose...] [-v...] [--no-build-output] [-Q] [ { --max-jobs | -j } number ] [ --cores number ] [ --max-silent-time number ] [ --timeout number ] [--keep-going] [-k] [--keep-failed] [-K] [--fallback] [--readonly-mode] [--log-type type] [--show-trace] [ -I path ]
[--arg name value] [--argstr name value] [ { --attr | -A } attrPath ] [--drv-link drvlink] [--add-drv-link] [--no-out-link] [ { --out-link | -o } outlink ] [ --run-env [--command cmd] [--exclude regexp] ] paths...

Description

The nix-build command builds the derivations described by the Nix expressions in paths. If the build succeeds, it places a symlink to the result in the current directory. The symlink is called result. If there are multiple Nix expressions, or the Nix expressions evaluate to multiple derivations, multiple sequentially numbered symlinks are created (result, result-2, and so on).

If no paths are specified, then nix-build will use default.nix in the current directory, if it exists.

nix-build is essentially a wrapper around nix-instantiate (to translate a high-level Nix expression to a low-level store derivation) and nix-store --realise (to build the store derivation).

Warning

The result of the build is automatically registered as a root of the Nix garbage collector. This root disappears automatically when the result symlink is deleted or renamed. So don’t rename the symlink.

The subcommand nix-build --run-env will build the dependencies of the derivation, but not the derivation itself. It will then start an interactive shell in which all environment variables defined by the derivation have been set to their corresponding values. This is useful for reproducing the environment of a derivation for development.

Options

All options not listed here are passed to nix-store --realise, except for --arg and --attr / -A which are passed to nix-instantiate. See also Section A.1, “Common options”.

--drv-link drvlink

Add a symlink named drvlink to the store derivation produced by nix-instantiate. The derivation is a root of the garbage collector until the symlink is deleted or renamed. If there are multiple derivations, numbers are suffixed to drvlink to distinguish between them.

--add-drv-link

Shorthand for --drv-link ./derivation.

--no-out-link

Do not create a symlink to the output path. Note that as a result the output does not become a root of the garbage collector, and so might be deleted by nix-store --gc.

--out-link / -o outlink

Change the name of the symlink to the output path created from result to outlink.

The following options apply to nix-build --run-env.

--command cmd

In the environment of the derivation, executeq the command cmd instead of the default interactive shell.

--exclude regexp

Do not build any dependencies whose store path matches the regular expression regexp. This option may be specified multiple times.

Examples

$ nix-build '<nixpkgs>' -A firefox
store derivation is /nix/store/qybprl8sz2lc...-firefox-1.5.0.7.drv
/nix/store/d18hyl92g30l...-firefox-1.5.0.7

$ ls -l result
lrwxrwxrwx  ...  result -> /nix/store/d18hyl92g30l...-firefox-1.5.0.7

$ ls ./result/bin/
firefox  firefox-config

To build the dependencies of the package Pan, and start an interactive shell in which to build it:

$ nix-build '<nixpkgs>' --run-env -A pan
$ tar xf $src
$ cd pan-*
$ ./configure
$ make
$ ./pan/gui/pan


Name

nix-channel — manage Nix channels

Synopsis

nix-channel { --add url [name] | --remove url | --list | --update [names...] }

Description

A Nix channel is mechanism that allows you to automatically stay up-to-date with a set of pre-built Nix expressions. A Nix channel is just a URL that points to a place containing a set of Nix expressions and a nix-push manifest. See also Section 4.4, “Channels”.

This command has the following operations:

--add url [name]

Adds a channel named name with URL url to the list of subscribed channels. If name is omitted, it defaults to the last component of url, with the suffixes -stable or -unstable removed.

--remove name

Removes the channel named name from the list of subscribed channels.

--list

Prints the names and URLs of all subscribed channels on standard output.

--update [names…]

Downloads the Nix expressions of all subscribed channels (or only those included in names if specified), makes them the default for nix-env operations (by symlinking them from the directory ~/.nix-defexpr), and performs a nix-pull on the manifests of all channels to make pre-built binaries available.

Note that --add does not automatically perform an update.

The list of subscribed channels is stored in ~/.nix-channels.

A channel consists of two elements: a bzipped Tar archive containing the Nix expressions, and a manifest created by nix-push. These must be stored under url/nixexprs.tar.bz2 and url/MANIFEST, respectively.

Examples

To subscribe to the Nixpkgs channel and install the GNU Hello package:

$ nix-channel --add http://nixos.org/releases/nixpkgs/channels/nixpkgs-unstable
$ nix-channel --update
$ nix-env -iA nixpkgs.hello

Name

nix-collect-garbage — delete unreachable store paths

Synopsis

nix-collect-garbage [--delete-old] [-d] [ --print-roots | --print-live | --print-dead | --delete ]

Description

The command nix-collect-garbage is mostly an alias of nix-store --gc, that is, it deletes all unreachable paths in the Nix store to clean up your system. However, it provides an additional option -d (--delete-old) that deletes all old generations of all profiles in /nix/var/nix/profiles by invoking nix-env --delete-generations old on all profiles. Of course, this makes rollbacks to previous configurations impossible.

Example

To delete from the Nix store everything that is not used by the current generations of each profile, do

$ nix-collect-garbage -d


Name

nix-copy-closure — copy a closure to or from a remote machine via SSH

Synopsis

nix-copy-closure [ --to | --from ] [--sign] [--gzip] [--bzip2] [--xz] [--show-progress] [--include-outputs] user@machine paths

Description

nix-copy-closure gives you an easy and efficient way to exchange software between machines. Given one or more Nix store paths paths on the local machine, nix-copy-closure computes the closure of those paths (i.e. all their dependencies in the Nix store), and copies all paths in the closure to the remote machine via the ssh (Secure Shell) command. With the --from, the direction is reversed: the closure of paths on a remote machine is copied to the Nix store on the local machine.

This command is efficient because it only sends the store paths that are missing on the target machine.

Since nix-copy-closure calls ssh, you may be asked to type in the appropriate password or passphrase. In fact, you may be asked twice because nix-copy-closure currently connects twice to the remote machine, first to get the set of paths missing on the target machine, and second to send the dump of those paths. If this bothers you, use ssh-agent.

Options

--to

Copy the closure of paths from the local Nix store to the Nix store on machine. This is the default.

--from

Copy the closure of paths from the Nix store on machine to the local Nix store.

--sign

Let the sending machine cryptographically sign the dump of each path with the key in sysconfdir/nix/signing-key.sec. If the user on the target machine does not have direct access to the Nix store (i.e., if the target machine has a multi-user Nix installation), then the target machine will check the dump against sysconfdir/nix/signing-key.pub before unpacking it in its Nix store. This allows secure sharing of store paths between untrusted users on two machines, provided that there is a trust relation between the Nix installations on both machines (namely, they have matching public/secret keys).

--gzip / --bzip2 / --xz

Compress the dump of each path with respectively gzip, bzip2 or xz before sending it. The corresponding decompression program must be installed on the target machine.

--show-progress

Show the progress of each path's transfer as it's made. This requires the pv utility to be in PATH.

--include-outputs

Also copy the outputs of store derivations included in the closure.

Environment variables

NIX_SSHOPTS

Additional options to be passed to ssh on the command line.

Examples

Copy Firefox with all its dependencies to a remote machine:

$ nix-copy-closure --to alice@itchy.labs $(type -tP firefox)

Copy Subversion from a remote machine and then install it into a user environment:

$ nix-copy-closure --from alice@itchy.labs \
    /nix/store/0dj0503hjxy5mbwlafv1rsbdiyx1gkdy-subversion-1.4.4
$ nix-env -i /nix/store/0dj0503hjxy5mbwlafv1rsbdiyx1gkdy-subversion-1.4.4


Name

nix-hash — compute the cryptographic hash of a path

Synopsis

nix-hash [--flat] [--base32] [--truncate] [--type hashAlgo] path...

nix-hash --to-base16 hash...

nix-hash --to-base32 hash...

Description

The command nix-hash computes the cryptographic hash of the contents of each path and prints it on standard output. By default, it computes an MD5 hash, but other hash algorithms are available as well. The hash is printed in hexadecimal.

The hash is computed over a serialisation of each path: a dump of the file system tree rooted at the path. This allows directories and symlinks to be hashed as well as regular files. The dump is in the NAR format produced by nix-store --dump. Thus, nix-hash path yields the same cryptographic hash as nix-store --dump path | md5sum.

Options

--flat

Print the cryptographic hash of the contents of each regular file path. That is, do not compute the hash over the dump of path. The result is identical to that produced by the GNU commands md5sum and sha1sum.

--base32

Print the hash in a base-32 representation rather than hexadecimal. This base-32 representation is more compact and can be used in Nix expressions (such as in calls to fetchurl).

--truncate

Truncate hashes longer than 160 bits (such as SHA-256) to 160 bits.

--type hashAlgo

Specify a cryptographic hash, which can be one of md5, sha1, and sha256.

--to-base16

Don’t hash anything, but convert the base-32 hash representation hash to hexadecimal.

--to-base32

Don’t hash anything, but convert the hexadecimal hash representation hash to base-32.

Examples

Computing hashes:

$ mkdir test
$ echo "hello" > test/world

$ nix-hash test/ (MD5 hash; default)
8179d3caeff1869b5ba1744e5a245c04

$ nix-store --dump test/ | md5sum (for comparison)
8179d3caeff1869b5ba1744e5a245c04  -

$ nix-hash --type sha1 test/
e4fd8ba5f7bbeaea5ace89fe10255536cd60dab6

$ nix-hash --type sha1 --base32 test/
nvd61k9nalji1zl9rrdfmsmvyyjqpzg4

$ nix-hash --type sha256 --flat test/
error: reading file `test/': Is a directory

$ nix-hash --type sha256 --flat test/world
5891b5b522d5df086d0ff0b110fbd9d21bb4fc7163af34d08286a2e846f6be03

Converting between hexadecimal and base-32:

$ nix-hash --type sha1 --to-base32 e4fd8ba5f7bbeaea5ace89fe10255536cd60dab6
nvd61k9nalji1zl9rrdfmsmvyyjqpzg4

$ nix-hash --type sha1 --to-base16 nvd61k9nalji1zl9rrdfmsmvyyjqpzg4
e4fd8ba5f7bbeaea5ace89fe10255536cd60dab6


Name

nix-install-package — install a Nix Package file

Synopsis

nix-install-package [--non-interactive] [ { --profile | -p } path ]
{{ --url url } | { file }}

Description

The command nix-install-package interactively installs a Nix Package file (*.nixpkg), which is a small file that contains a store path to be installed along with the URL of a nix-push manifest. The Nix Package file is either file, or automatically downloaded from url if the --url switch is used.

nix-install-package is used in one-click installs to download and install pre-built binary packages with all necessary dependencies. nix-install-package is intended to be associated with the MIME type application/nix-package in a web browser so that it is invoked automatically when you click on *.nixpkg files. When invoked, it restarts itself in a terminal window (since otherwise it would be invisible when run from a browser), asks the user to confirm whether to install the package, and if so downloads and installs the package into the user’s current profile.

To obtain a window, nix-install-package tries to restart itself with xterm, konsole and gnome-terminal.

Options

--non-interactive

Do not open a new terminal window and do not ask for confirmation.

--profile, -p

Install the package into the specified profile rather than the user’s current profile.

Examples

To install subversion-1.4.0.nixpkg into the user’s current profile, without any prompting:

$ nix-install-package --non-interactive subversion-1.4.0.nixpkg

To install the same package from some URL into a different profile:

$ nix-install-package --non-interactive -p /nix/var/nix/profiles/eelco \
    --url http://nix.cs.uu.nl/dist/nix/nixpkgs-0.10pre6622/pkgs/subversion-1.4.0-i686-linux.nixpkg

Format of nixpkg files

A Nix Package file consists of a single line with the following format:

NIXPKG1 manifestURL name system drvPath outPath

The elemens are as follows:

NIXPKG1

The version of the Nix Package file.

manifestURL

The manifest to be pulled by nix-pull. The manifest must contain outPath.

name

The symbolic name and version of the package.

system

The platform identifier of the platform for which this binary package is intended.

drvPath

The path in the Nix store of the derivation from which outPath was built. Not currently used.

outPath

The path in the Nix store of the package. After nix-install-package has obtained the manifest from manifestURL, it performs a nix-env -i outPath to install the binary package.

An example follows:

NIXPKG1 http://.../nixpkgs-0.10pre6622/MANIFEST subversion-1.4.0 i686-darwin \
  /nix/store/4kh60jkp...-subversion-1.4.0.drv \
  /nix/store/nkw7wpgb...-subversion-1.4.0

(The line breaks (\) are for presentation purposes and not part of the actual file.)


Name

nix-prefetch-url — copy a file from a URL into the store and print its hash

Synopsis

nix-prefetch-url url [hash]

Description

The command nix-prefetch-url downloads the file referenced by the URL url, prints its cryptographic hash, and copies it into the Nix store. The file name in the store is hash-baseName, where baseName is everything following the final slash in url.

This command is just a convenience for Nix expression writers. Often a Nix expression fetches some source distribution from the network using the fetchurl expression contained in Nixpkgs. However, fetchurl requires a cryptographic hash. If you don't know the hash, you would have to download the file first, and then fetchurl would download it again when you build your Nix expression. Since fetchurl uses the same name for the downloaded file as nix-prefetch-url, the redundant download can be avoided.

The environment variable NIX_HASH_ALGO specifies which hash algorithm to use. It can be either md5, sha1, or sha256. The default is sha256.

If hash is specified, then a download is not performed if the Nix store already contains a file with the same hash and base name. Otherwise, the file is downloaded, and an error if signaled if the actual hash of the file does not match the specified hash.

This command prints the hash on standard output. Additionally, if the environment variable PRINT_PATH is set, the path of the downloaded file in the Nix store is also printed.

Examples

$ nix-prefetch-url ftp://ftp.nluug.nl/pub/gnu/make/make-3.80.tar.bz2
0bbd1df101bc0294d440471e50feca71

$ PRINT_PATH=1 nix-prefetch-url ftp://ftp.nluug.nl/pub/gnu/make/make-3.80.tar.bz2
0bbd1df101bc0294d440471e50feca71
/nix/store/wvyz8ifdn7wyz1p3pqyn0ra45ka2l492-make-3.80.tar.bz2

Name

nix-pull — pull substitutes from a network cache

Synopsis

nix-pull url

Description

The command nix-pull obtains a list of pre-built store paths from the URL url, and for each of these store paths, registers a substitute derivation that downloads and unpacks it into the Nix store. This is used to speed up installations: if you attempt to install something that has already been built and stored into the network cache, Nix can transparently re-use the pre-built store paths.

The file at url must be compatible with the files created by nix-push.

Examples

$ nix-pull http://nix.cs.uu.nl/dist/nix/nixpkgs-0.5pre753/MANIFEST

Name

nix-push — push store paths onto a network cache

Synopsis

nix-push {{ archivesPutURL archivesGetURL manifestPutURL } | { --copy archivesDir manifestFile }} paths...

Description

The command nix-push builds a set of store paths (if necessary), and then packages and uploads all store paths in the resulting closures to a server. A network cache thus populated can subsequently be used to speed up software deployment on other machines using the nix-pull command.

nix-push performs the following actions.

  1. Each path in paths is realised (using nix-store --realise).

  2. All paths in the closure of the store expressions stored in paths are determined (using nix-store --query --requisites --include-outputs). It should be noted that since the --include-outputs flag is used, you get a combined source/binary distribution.

  3. All store paths determined in the previous step are packaged and compressed into a bzipped NAR archive (extension .nar.bz2).

  4. A manifest is created that contains information on the store paths, their eventual URLs in the cache, and cryptographic hashes of the contents of the NAR archives.

  5. Each store path is uploaded to the remote directory specified by archivesPutURL. HTTP PUT requests are used to do this. However, before a file x is uploaded to archivesPutURL/x, nix-push first determines whether this upload is unnecessary by issuing a HTTP HEAD request on archivesGetURL/x. This allows a cache to be shared between many partially overlapping nix-push invocations. (We use two URLs because the upload URL typically refers to a CGI script, while the download URL just refers to a file system directory on the server.)

  6. The manifest is uploaded using an HTTP PUT request to manifestPutURL. The corresponding URL to download the manifest can then be used by nix-pull.

Examples

To upload files there typically is some CGI script on the server side. This script should be be protected with a password. The following example uploads the store paths resulting from building the Nix expressions in foo.nix, passing appropriate authentication information:

$ nix-push \
    http://foo@bar:server.domain/cgi-bin/upload.pl/cache \
    http://server.domain/cache \
    http://foo@bar:server.domain/cgi-bin/upload.pl/MANIFEST \
    $(nix-instantiate foo.nix)

This will push both sources and binaries (and any build-time dependencies used in the build, such as compilers).

If we just want to push binaries, not sources and build-time dependencies, we can do:

$ nix-push urls $(nix-store -r $(nix-instantiate foo.nix))


Name

nix-worker — Nix multi-user support daemon

Synopsis

nix-worker --daemon

Description

The Nix daemon is necessary in multi-user Nix installations. It performs build actions and other operations on the Nix store on behalf of unprivileged users.

Appendix B. Troubleshooting

This section provides solutions for some common problems. See the Nix bug tracker for a list of currently known issues.

B.1. Collisions in nix-env

Symptom: when installing or upgrading, you get an error message such as

$ nix-env -i docbook-xml
...
adding /nix/store/s5hyxgm62gk2...-docbook-xml-4.2
collission between `/nix/store/s5hyxgm62gk2...-docbook-xml-4.2/xml/dtd/docbook/calstblx.dtd'
  and `/nix/store/06h377hr4b33...-docbook-xml-4.3/xml/dtd/docbook/calstblx.dtd'
  at /nix/store/...-builder.pl line 62.

The cause is that two installed packages in the user environment have overlapping filenames (e.g., xml/dtd/docbook/calstblx.dtd. This usually happens when you accidentally try to install two versions of the same package. For instance, in the example above, the Nix Packages collection contains two versions of docbook-xml, so nix-env -i will try to install both. The default user environment builder has no way to way to resolve such conflicts, so it just gives up.

Solution: remove one of the offending packages from the user environment (if already installed) using nix-env -e, or specify exactly which version should be installed (e.g., nix-env -i docbook-xml-4.2).

Alternatively, you can modify the user environment builder script (in prefix/share/nix/corepkgs/buildenv/builder.pl) to implement some conflict resolution policy. E.g., the script could be modified to rename conflicting file names, or to pick one over the other.

B.2. Too many links error in the Nix store

Symptom: when building something, you get an error message such as

...
mkdir: cannot create directory `/nix/store/name': Too many links

This is usually because you have more than 32,000 subdirectories in /nix/store, as can be seen using ls -l:

$ ls -l /nix/store
drwxrwxrwt 32000 nix nix 4620288 Sep 8 15:08 store

The ext2 file system is limited to a inode link count of 32,000 (each subdirectory increasing the count by one). Furthermore, the st_nlink field of the stat system call is a 16-bit value.

This only happens on very large Nix installations (such as build machines).

Quick solution: run the garbage collector. You may want to use the --max-links option.

Real solution: put the Nix store on a file system that supports more than 32,000 subdirectories per directory, such as ReiserFS. (This doesn’t solve the st_nlink limit, but ReiserFS lies to the kernel by reporting a link count of 1 if it exceeds the limit.)

Appendix C. Glossary

derivation

A description of a build action. The result of a derivation is a store object. Derivations are typically specified in Nix expressions using the derivation primitive. These are translated into low-level store derivations (implicitly by nix-env and nix-build, or explicitly by nix-instantiate).

store

The location in the file system where store objects live. Typically /nix/store.

store path

The location in the file system of a store object, i.e., an immediate child of the Nix store directory.

store object

A file that is an immediate child of the Nix store directory. These can be regular files, but also entire directory trees. Store objects can be sources (objects copied from outside of the store), derivation outputs (objects produced by running a build action), or derivations (files describing a build action).

substitute

A substitute is a command invocation stored in the Nix database that describes how to build a store object, bypassing normal the build mechanism (i.e., derivations). Typically, the substitute builds the store object by downloading a pre-built version of the store object from some server.

purity

The assumption that equal Nix derivations when run always produce the same output. This cannot be guaranteed in general (e.g., a builder can rely on external inputs such as the network or the system time) but the Nix model assumes it.

Nix expression

A high-level description of software packages and compositions thereof. Deploying software using Nix entails writing Nix expressions for your packages. Nix expressions are translated to derivations that are stored in the Nix store. These derivations can then be built.

reference

A store path P is said to have a reference to a store path Q if the store object at P contains the path Q somewhere. This implies than an execution involving P potentially needs Q to be present. The references of a store path are the set of store paths to which it has a reference.

closure

The closure of a store path is the set of store paths that are directly or indirectly “reachable” from that store path; that is, it’s the closure of the path under the references relation. For instance, if the store object at path P contains a reference to path Q, then Q is in the closure of P. For correct deployment it is necessary to deploy whole closures, since otherwise at runtime files could be missing. The command nix-store -qR prints out closures of store paths.

output path

A store path produced by a derivation.

deriver

The deriver of an output path is the store derivation that built it.

validity

A store path is considered valid if it exists in the file system, is listed in the Nix database as being valid, and if all paths in its closure are also valid.

user environment

An automatically generated store object that consists of a set of symlinks to “active” applications, i.e., other store paths. These are generated automatically by nix-env. See Section 4.2, “Profiles”.

profile

A symlink to the current user environment of a user, e.g., /nix/var/nix/profiles/default.

Appendix D. Nix Release Notes

D.1. Release 1.0 (May 11, 2012)

There have been numerous improvements and bug fixes since the previous release. Here are the most significant:

  • Nix can now optionally use the Boehm garbage collector. This significantly reduces the Nix evaluator’s memory footprint, especially when evaluating large NixOS system configurations. It can be enabled using the --enable-gc configure option.

  • Nix now uses SQLite for its database. This is faster and more flexible than the old ad hoc format. SQLite is also used to cache the manifests in /nix/var/nix/manifests, resulting in a significant speedup.

  • Nix now has an search path for expressions. The search path is set using the environment variable NIX_PATH and the -I command line option. In Nix expressions, paths between angle brackets are used to specify files that must be looked up in the search path. For instance, the expression <nixpkgs/default.nix> looks for a file nixpkgs/default.nix relative to every element in the search path.

  • The new command nix-build --run-env builds all dependencies of a derivation, then starts a shell in an environment containing all variables from the derivation. This is useful for reproducing the environment of a derivation for development.

  • The new command nix-store --verify-path verifies that the contents of a store path have not changed.

  • The new command nix-store --print-env prints out the environment of a derivation in a format that can be evaluated by a shell.

  • Attribute names can now be arbitrary strings. For instance, you can write { "foo-1.2" = …; "bla bla" = …; }."bla bla".

  • Attribute selection can now provide a default value using the or operator. For instance, the expression x.y.z or e evaluates to the attribute x.y.z if it exists, and e otherwise.

  • The right-hand side of the ? operator can now be an attribute path, e.g., attrs ? a.b.c.

  • On Linux, Nix will now make files in the Nix store immutable on filesystems that support it. This prevents accidental modification of files in the store by the root user.

  • Nix has preliminary support for derivations with multiple outputs. This is useful because it allows parts of a package to be deployed and garbage-collected separately. For instance, development parts of a package such as header files or static libraries would typically not be part of the closure of an application, resulting in reduced disk usage and installation time.

  • The Nix store garbage collector is faster and holds the global lock for a shorter amount of time.

  • The option --timeout (corresponding to the configuration setting build-timeout) allows you to set an absolute timeout on builds — if a build runs for more than the given number of seconds, it is terminated. This is useful for recovering automatically from builds that are stuck in an infinite loop but keep producing output, and for which --max-silent-time is ineffective.

  • Nix development has moved to GitHub (https://github.com/NixOS/nix).

D.2. Release 0.16 (August 17, 2010)

This release has the following improvements:

  • The Nix expression evaluator is now much faster in most cases: typically, 3 to 8 times compared to the old implementation. It also uses less memory. It no longer depends on the ATerm library.

  • Support for configurable parallelism inside builders. Build scripts have always had the ability to perform multiple build actions in parallel (for instance, by running make -j 2), but this was not desirable because the number of actions to be performed in parallel was not configurable. Nix now has an option --cores N as well as a configuration setting build-cores = N that causes the environment variable NIX_BUILD_CORES to be set to N when the builder is invoked. The builder can use this at its discretion to perform a parallel build, e.g., by calling make -j N. In Nixpkgs, this can be enabled on a per-package basis by setting the derivation attribute enableParallelBuilding to true.

  • nix-store -q now supports XML output through the --xml flag.

  • Several bug fixes.

D.3. Release 0.15 (March 17, 2010)

This is a bug-fix release. Among other things, it fixes building on Mac OS X (Snow Leopard), and improves the contents of /etc/passwd and /etc/group in chroot builds.

D.4. Release 0.14 (February 4, 2010)

This release has the following improvements:

  • The garbage collector now starts deleting garbage much faster than before. It no longer determines liveness of all paths in the store, but does so on demand.

  • Added a new operation, nix-store --query --roots, that shows the garbage collector roots that directly or indirectly point to the given store paths.

  • Removed support for converting Berkeley DB-based Nix databases to the new schema.

  • Removed the --use-atime and --max-atime garbage collector options. They were not very useful in practice.

  • On Windows, Nix now requires Cygwin 1.7.x.

  • A few bug fixes.

D.5. Release 0.13 (November 5, 2009)

This is primarily a bug fix release. It has some new features:

  • Syntactic sugar for writing nested attribute sets. Instead of

    {
      foo = {
        bar = 123;
        xyzzy = true;
      };
      a = { b = { c = "d"; }; };
    }
    

    you can write

    {
      foo.bar = 123;
      foo.xyzzy = true;
      a.b.c = "d";
    }
    

    This is useful, for instance, in NixOS configuration files.

  • Support for Nix channels generated by Hydra, the Nix-based continuous build system. (Hydra generates NAR archives on the fly, so the size and hash of these archives isn’t known in advance.)

  • Support i686-linux builds directly on x86_64-linux Nix installations. This is implemented using the personality() syscall, which causes uname to return i686 in child processes.

  • Various improvements to the chroot support. Building in a chroot works quite well now.

  • Nix no longer blocks if it tries to build a path and another process is already building the same path. Instead it tries to build another buildable path first. This improves parallelism.

  • Support for large (> 4 GiB) files in NAR archives.

  • Various (performance) improvements to the remote build mechanism.

  • New primops: builtins.addErrorContext (to add a string to stack traces — useful for debugging), builtins.isBool, builtins.isString, builtins.isInt, builtins.intersectAttrs.

  • OpenSolaris support (Sander van der Burg).

  • Stack traces are no longer displayed unless the --show-trace option is used.

  • The scoping rules for inherit (e) ... in recursive attribute sets have changed. The expression e can now refer to the attributes defined in the containing set.

D.6. Release 0.12 (November 20, 2008)

  • Nix no longer uses Berkeley DB to store Nix store metadata. The principal advantages of the new storage scheme are: it works properly over decent implementations of NFS (allowing Nix stores to be shared between multiple machines); no recovery is needed when a Nix process crashes; no write access is needed for read-only operations; no more running out of Berkeley DB locks on certain operations.

    You still need to compile Nix with Berkeley DB support if you want Nix to automatically convert your old Nix store to the new schema. If you don’t need this, you can build Nix with the configure option --disable-old-db-compat.

    After the automatic conversion to the new schema, you can delete the old Berkeley DB files:

    $ cd /nix/var/nix/db
    $ rm __db* log.* derivers references referrers reserved validpaths DB_CONFIG

    The new metadata is stored in the directories /nix/var/nix/db/info and /nix/var/nix/db/referrer. Though the metadata is stored in human-readable plain-text files, they are not intended to be human-editable, as Nix is rather strict about the format.

    The new storage schema may or may not require less disk space than the Berkeley DB environment, mostly depending on the cluster size of your file system. With 1 KiB clusters (which seems to be the ext3 default nowadays) it usually takes up much less space.

  • There is a new substituter that copies paths directly from other (remote) Nix stores mounted somewhere in the filesystem. For instance, you can speed up an installation by mounting some remote Nix store that already has the packages in question via NFS or sshfs. The environment variable NIX_OTHER_STORES specifies the locations of the remote Nix directories, e.g. /mnt/remote-fs/nix.

  • New nix-store operations --dump-db and --load-db to dump and reload the Nix database.

  • The garbage collector has a number of new options to allow only some of the garbage to be deleted. The option --max-freed N tells the collector to stop after at least N bytes have been deleted. The option --max-links N tells it to stop after the link count on /nix/store has dropped below N. This is useful for very large Nix stores on filesystems with a 32000 subdirectories limit (like ext3). The option --use-atime causes store paths to be deleted in order of ascending last access time. This allows non-recently used stuff to be deleted. The option --max-atime time specifies an upper limit to the last accessed time of paths that may be deleted. For instance,

        $ nix-store --gc -v --max-atime $(date +%s -d "2 months ago")

    deletes everything that hasn’t been accessed in two months.

  • nix-env now uses optimistic profile locking when performing an operation like installing or upgrading, instead of setting an exclusive lock on the profile. This allows multiple nix-env -i / -u / -e operations on the same profile in parallel. If a nix-env operation sees at the end that the profile was changed in the meantime by another process, it will just restart. This is generally cheap because the build results are still in the Nix store.

  • The option --dry-run is now supported by nix-store -r and nix-build.

  • The information previously shown by --dry-run (i.e., which derivations will be built and which paths will be substituted) is now always shown by nix-env, nix-store -r and nix-build. The total download size of substitutable paths is now also shown. For instance, a build will show something like

    the following derivations will be built:
      /nix/store/129sbxnk5n466zg6r1qmq1xjv9zymyy7-activate-configuration.sh.drv
      /nix/store/7mzy971rdm8l566ch8hgxaf89x7lr7ik-upstart-jobs.drv
      ...
    the following paths will be downloaded/copied (30.02 MiB):
      /nix/store/4m8pvgy2dcjgppf5b4cj5l6wyshjhalj-samba-3.2.4
      /nix/store/7h1kwcj29ip8vk26rhmx6bfjraxp0g4l-libunwind-0.98.6
      ...

  • Language features:

    • @-patterns as in Haskell. For instance, in a function definition

      f = args @ {x, y, z}: ...;

      args refers to the argument as a whole, which is further pattern-matched against the attribute set pattern {x, y, z}.

    • ...” (ellipsis) patterns. An attribute set pattern can now say ... at the end of the attribute name list to specify that the function takes at least the listed attributes, while ignoring additional attributes. For instance,

      {stdenv, fetchurl, fuse, ...}: ...

      defines a function that accepts any attribute set that includes at least the three listed attributes.

    • New primops: builtins.parseDrvName (split a package name string like "nix-0.12pre12876" into its name and version components, e.g. "nix" and "0.12pre12876"), builtins.compareVersions (compare two version strings using the same algorithm that nix-env uses), builtins.length (efficiently compute the length of a list), builtins.mul (integer multiplication), builtins.div (integer division).

  • nix-prefetch-url now supports mirror:// URLs, provided that the environment variable NIXPKGS_ALL points at a Nixpkgs tree.

  • Removed the commands nix-pack-closure and nix-unpack-closure. You can do almost the same thing but much more efficiently by doing nix-store --export $(nix-store -qR paths) > closure and nix-store --import < closure.

  • Lots of bug fixes, including a big performance bug in the handling of with-expressions.

D.7. Release 0.11 (December 31, 2007)

Nix 0.11 has many improvements over the previous stable release. The most important improvement is secure multi-user support. It also features many usability enhancements and language extensions, many of them prompted by NixOS, the purely functional Linux distribution based on Nix. Here is an (incomplete) list:

  • Secure multi-user support. A single Nix store can now be shared between multiple (possible untrusted) users. This is an important feature for NixOS, where it allows non-root users to install software. The old setuid method for sharing a store between multiple users has been removed. Details for setting up a multi-user store can be found in the manual.

  • The new command nix-copy-closure gives you an easy and efficient way to exchange software between machines. It copies the missing parts of the closure of a set of store path to or from a remote machine via ssh.

  • A new kind of string literal: strings between double single-quotes ('') have indentation “intelligently” removed. This allows large strings (such as shell scripts or configuration file fragments in NixOS) to cleanly follow the indentation of the surrounding expression. It also requires much less escaping, since '' is less common in most languages than ".

  • nix-env --set modifies the current generation of a profile so that it contains exactly the specified derivation, and nothing else. For example, nix-env -p /nix/var/nix/profiles/browser --set firefox lets the profile named browser contain just Firefox.

  • nix-env now maintains meta-information about installed packages in profiles. The meta-information is the contents of the meta attribute of derivations, such as description or homepage. The command nix-env -q --xml --meta shows all meta-information.

  • nix-env now uses the meta.priority attribute of derivations to resolve filename collisions between packages. Lower priority values denote a higher priority. For instance, the GCC wrapper package and the Binutils package in Nixpkgs both have a file bin/ld, so previously if you tried to install both you would get a collision. Now, on the other hand, the GCC wrapper declares a higher priority than Binutils, so the former’s bin/ld is symlinked in the user environment.

  • nix-env -i / -u: instead of breaking package ties by version, break them by priority and version number. That is, if there are multiple packages with the same name, then pick the package with the highest priority, and only use the version if there are multiple packages with the same priority.

    This makes it possible to mark specific versions/variant in Nixpkgs more or less desirable than others. A typical example would be a beta version of some package (e.g., gcc-4.2.0rc1) which should not be installed even though it is the highest version, except when it is explicitly selected (e.g., nix-env -i gcc-4.2.0rc1).

  • nix-env --set-flag allows meta attributes of installed packages to be modified. There are several attributes that can be usefully modified, because they affect the behaviour of nix-env or the user environment build script:

    • meta.priority can be changed to resolve filename clashes (see above).

    • meta.keep can be set to true to prevent the package from being upgraded or replaced. Useful if you want to hang on to an older version of a package.

    • meta.active can be set to false to “disable” the package. That is, no symlinks will be generated to the files of the package, but it remains part of the profile (so it won’t be garbage-collected). Set it back to true to re-enable the package.

  • nix-env -q now has a flag --prebuilt-only (-b) that causes nix-env to show only those derivations whose output is already in the Nix store or that can be substituted (i.e., downloaded from somewhere). In other words, it shows the packages that can be installed “quickly”, i.e., don’t need to be built from source. The -b flag is also available in nix-env -i and nix-env -u to filter out derivations for which no pre-built binary is available.

  • The new option --argstr (in nix-env, nix-instantiate and nix-build) is like --arg, except that the value is a string. For example, --argstr system i686-linux is equivalent to --arg system \"i686-linux\" (note that --argstr prevents annoying quoting around shell arguments).

  • nix-store has a new operation --read-log (-l) paths that shows the build log of the given paths.

  • Nix now uses Berkeley DB 4.5. The database is upgraded automatically, but you should be careful not to use old versions of Nix that still use Berkeley DB 4.4.

  • The option --max-silent-time (corresponding to the configuration setting build-max-silent-time) allows you to set a timeout on builds — if a build produces no output on stdout or stderr for the given number of seconds, it is terminated. This is useful for recovering automatically from builds that are stuck in an infinite loop.

  • nix-channel: each subscribed channel is its own attribute in the top-level expression generated for the channel. This allows disambiguation (e.g. nix-env -i -A nixpkgs_unstable.firefox).

  • The substitutes table has been removed from the database. This makes operations such as nix-pull and nix-channel --update much, much faster.

  • nix-pull now supports bzip2-compressed manifests. This speeds up channels.

  • nix-prefetch-url now has a limited form of caching. This is used by nix-channel to prevent unnecessary downloads when the channel hasn’t changed.

  • nix-prefetch-url now by default computes the SHA-256 hash of the file instead of the MD5 hash. In calls to fetchurl you should pass the sha256 attribute instead of md5. You can pass either a hexadecimal or a base-32 encoding of the hash.

  • Nix can now perform builds in an automatically generated “chroot”. This prevents a builder from accessing stuff outside of the Nix store, and thus helps ensure purity. This is an experimental feature.

  • The new command nix-store --optimise reduces Nix store disk space usage by finding identical files in the store and hard-linking them to each other. It typically reduces the size of the store by something like 25-35%.

  • ~/.nix-defexpr can now be a directory, in which case the Nix expressions in that directory are combined into an attribute set, with the file names used as the names of the attributes. The command nix-env --import (which set the ~/.nix-defexpr symlink) is removed.

  • Derivations can specify the new special attribute allowedReferences to enforce that the references in the output of a derivation are a subset of a declared set of paths. For example, if allowedReferences is an empty list, then the output must not have any references. This is used in NixOS to check that generated files such as initial ramdisks for booting Linux don’t have any dependencies.

  • The new attribute exportReferencesGraph allows builders access to the references graph of their inputs. This is used in NixOS for tasks such as generating ISO-9660 images that contain a Nix store populated with the closure of certain paths.

  • Fixed-output derivations (like fetchurl) can define the attribute impureEnvVars to allow external environment variables to be passed to builders. This is used in Nixpkgs to support proxy configuration, among other things.

  • Several new built-in functions: builtins.attrNames, builtins.filterSource, builtins.isAttrs, builtins.isFunction, builtins.listToAttrs, builtins.stringLength, builtins.sub, builtins.substring, throw, builtins.trace, builtins.readFile.

D.8. Release 0.10.1 (October 11, 2006)

This release fixes two somewhat obscure bugs that occur when evaluating Nix expressions that are stored inside the Nix store (NIX-67). These do not affect most users.

D.9. Release 0.10 (October 6, 2006)

Note

This version of Nix uses Berkeley DB 4.4 instead of 4.3. The database is upgraded automatically, but you should be careful not to use old versions of Nix that still use Berkeley DB 4.3. In particular, if you use a Nix installed through Nix, you should run

$ nix-store --clear-substitutes

first.

Warning

Also, the database schema has changed slighted to fix a performance issue (see below). When you run any Nix 0.10 command for the first time, the database will be upgraded automatically. This is irreversible.

  • nix-env usability improvements:

    • An option --compare-versions (or -c) has been added to nix-env --query to allow you to compare installed versions of packages to available versions, or vice versa. An easy way to see if you are up to date with what’s in your subscribed channels is nix-env -qc \*.

    • nix-env --query now takes as arguments a list of package names about which to show information, just like --install, etc.: for example, nix-env -q gcc. Note that to show all derivations, you need to specify \*.

    • nix-env -i pkgname will now install the highest available version of pkgname, rather than installing all available versions (which would probably give collisions) (NIX-31).

    • nix-env (-i|-u) --dry-run now shows exactly which missing paths will be built or substituted.

    • nix-env -qa --description shows human-readable descriptions of packages, provided that they have a meta.description attribute (which most packages in Nixpkgs don’t have yet).

  • New language features:

    • Reference scanning (which happens after each build) is much faster and takes a constant amount of memory.

    • String interpolation. Expressions like

      "--with-freetype2-library=" + freetype + "/lib"

      can now be written as

      "--with-freetype2-library=${freetype}/lib"

      You can write arbitrary expressions within ${...}, not just identifiers.

    • Multi-line string literals.

    • String concatenations can now involve derivations, as in the example "--with-freetype2-library=" + freetype + "/lib". This was not previously possible because we need to register that a derivation that uses such a string is dependent on freetype. The evaluator now properly propagates this information. Consequently, the subpath operator (~) has been deprecated.

    • Default values of function arguments can now refer to other function arguments; that is, all arguments are in scope in the default values (NIX-45).

    • Lots of new built-in primitives, such as functions for list manipulation and integer arithmetic. See the manual for a complete list. All primops are now available in the set builtins, allowing one to test for the availability of primop in a backwards-compatible way.

    • Real let-expressions: let x = ...; ... z = ...; in ....

  • New commands nix-pack-closure and nix-unpack-closure than can be used to easily transfer a store path with all its dependencies to another machine. Very convenient whenever you have some package on your machine and you want to copy it somewhere else.

  • XML support:

    • nix-env -q --xml prints the installed or available packages in an XML representation for easy processing by other tools.

    • nix-instantiate --eval-only --xml prints an XML representation of the resulting term. (The new flag --strict forces ‘deep’ evaluation of the result, i.e., list elements and attributes are evaluated recursively.)

    • In Nix expressions, the primop builtins.toXML converts a term to an XML representation. This is primarily useful for passing structured information to builders.

  • You can now unambigously specify which derivation to build or install in nix-env, nix-instantiate and nix-build using the --attr / -A flags, which takes an attribute name as argument. (Unlike symbolic package names such as subversion-1.4.0, attribute names in an attribute set are unique.) For instance, a quick way to perform a test build of a package in Nixpkgs is nix-build pkgs/top-level/all-packages.nix -A foo. nix-env -q --attr shows the attribute names corresponding to each derivation.

  • If the top-level Nix expression used by nix-env, nix-instantiate or nix-build evaluates to a function whose arguments all have default values, the function will be called automatically. Also, the new command-line switch --arg name value can be used to specify function arguments on the command line.

  • nix-install-package --url URL allows a package to be installed directly from the given URL.

  • Nix now works behind an HTTP proxy server; just set the standard environment variables http_proxy, https_proxy, ftp_proxy or all_proxy appropriately. Functions such as fetchurl in Nixpkgs also respect these variables.

  • nix-build -o symlink allows the symlink to the build result to be named something other than result.

  • Platform support:

    • Support for 64-bit platforms, provided a suitably patched ATerm library is used. Also, files larger than 2 GiB are now supported.

    • Added support for Cygwin (Windows, i686-cygwin), Mac OS X on Intel (i686-darwin) and Linux on PowerPC (powerpc-linux).

    • Users of SMP and multicore machines will appreciate that the number of builds to be performed in parallel can now be specified in the configuration file in the build-max-jobs setting.

  • Garbage collector improvements:

    • Open files (such as running programs) are now used as roots of the garbage collector. This prevents programs that have been uninstalled from being garbage collected while they are still running. The script that detects these additional runtime roots (find-runtime-roots.pl) is inherently system-specific, but it should work on Linux and on all platforms that have the lsof utility.

    • nix-store --gc (a.k.a. nix-collect-garbage) prints out the number of bytes freed on standard output. nix-store --gc --print-dead shows how many bytes would be freed by an actual garbage collection.

    • nix-collect-garbage -d removes all old generations of all profiles before calling the actual garbage collector (nix-store --gc). This is an easy way to get rid of all old packages in the Nix store.

    • nix-store now has an operation --delete to delete specific paths from the Nix store. It won’t delete reachable (non-garbage) paths unless --ignore-liveness is specified.

  • Berkeley DB 4.4’s process registry feature is used to recover from crashed Nix processes.

  • A performance issue has been fixed with the referer table, which stores the inverse of the references table (i.e., it tells you what store paths refer to a given path). Maintaining this table could take a quadratic amount of time, as well as a quadratic amount of Berkeley DB log file space (in particular when running the garbage collector) (NIX-23).

  • Nix now catches the TERM and HUP signals in addition to the INT signal. So you can now do a killall nix-store without triggering a database recovery.

  • bsdiff updated to version 4.3.

  • Substantial performance improvements in expression evaluation and nix-env -qa, all thanks to Valgrind. Memory use has been reduced by a factor 8 or so. Big speedup by memoisation of path hashing.

  • Lots of bug fixes, notably:

    • Make sure that the garbage collector can run succesfully when the disk is full (NIX-18).

    • nix-env now locks the profile to prevent races between concurrent nix-env operations on the same profile (NIX-7).

    • Removed misleading messages from nix-env -i (e.g., installing `foo' followed by uninstalling `foo') (NIX-17).

  • Nix source distributions are a lot smaller now since we no longer include a full copy of the Berkeley DB source distribution (but only the bits we need).

  • Header files are now installed so that external programs can use the Nix libraries.

D.10. Release 0.9.2 (September 21, 2005)

This bug fix release fixes two problems on Mac OS X:

  • If Nix was linked against statically linked versions of the ATerm or Berkeley DB library, there would be dynamic link errors at runtime.

  • nix-pull and nix-push intermittently failed due to race conditions involving pipes and child processes with error messages such as open2: open(GLOB(0x180b2e4), >&=9) failed: Bad file descriptor at /nix/bin/nix-pull line 77 (issue NIX-14).

D.11. Release 0.9.1 (September 20, 2005)

This bug fix release addresses a problem with the ATerm library when the --with-aterm flag in configure was not used.

D.12. Release 0.9 (September 16, 2005)

NOTE: this version of Nix uses Berkeley DB 4.3 instead of 4.2. The database is upgraded automatically, but you should be careful not to use old versions of Nix that still use Berkeley DB 4.2. In particular, if you use a Nix installed through Nix, you should run

$ nix-store --clear-substitutes

first.

  • Unpacking of patch sequences is much faster now since we no longer do redundant unpacking and repacking of intermediate paths.

  • Nix now uses Berkeley DB 4.3.

  • The derivation primitive is lazier. Attributes of dependent derivations can mutually refer to each other (as long as there are no data dependencies on the outPath and drvPath attributes computed by derivation).

    For example, the expression derivation attrs now evaluates to (essentially)

    attrs // {
      type = "derivation";
      outPath = derivation! attrs;
      drvPath = derivation! attrs;
    }

    where derivation! is a primop that does the actual derivation instantiation (i.e., it does what derivation used to do). The advantage is that it allows commands such as nix-env -qa and nix-env -i to be much faster since they no longer need to instantiate all derivations, just the name attribute.

    Also, it allows derivations to cyclically reference each other, for example,

    webServer = derivation {
      ...
      hostName = "svn.cs.uu.nl";
      services = [svnService];
    };
     
    svnService = derivation {
      ...
      hostName = webServer.hostName;
    };

    Previously, this would yield a black hole (infinite recursion).

  • nix-build now defaults to using ./default.nix if no Nix expression is specified.

  • nix-instantiate, when applied to a Nix expression that evaluates to a function, will call the function automatically if all its arguments have defaults.

  • Nix now uses libtool to build dynamic libraries. This reduces the size of executables.

  • A new list concatenation operator ++. For example, [1 2 3] ++ [4 5 6] evaluates to [1 2 3 4 5 6].

  • Some currently undocumented primops to support low-level build management using Nix (i.e., using Nix as a Make replacement). See the commit messages for r3578 and r3580.

  • Various bug fixes and performance improvements.

D.13. Release 0.8.1 (April 13, 2005)

This is a bug fix release.

  • Patch downloading was broken.

  • The garbage collector would not delete paths that had references from invalid (but substitutable) paths.

D.14. Release 0.8 (April 11, 2005)

NOTE: the hashing scheme in Nix 0.8 changed (as detailed below). As a result, nix-pull manifests and channels built for Nix 0.7 and below will now work anymore. However, the Nix expression language has not changed, so you can still build from source. Also, existing user environments continue to work. Nix 0.8 will automatically upgrade the database schema of previous installations when it is first run.

If you get the error message

you have an old-style manifest `/nix/var/nix/manifests/[...]'; please
delete it

you should delete previously downloaded manifests:

$ rm /nix/var/nix/manifests/*

If nix-channel gives the error message

manifest `http://catamaran.labs.cs.uu.nl/dist/nix/channels/[channel]/MANIFEST'
is too old (i.e., for Nix <= 0.7)

then you should unsubscribe from the offending channel (nix-channel --remove URL; leave out /MANIFEST), and subscribe to the same URL, with channels replaced by channels-v3 (e.g., http://catamaran.labs.cs.uu.nl/dist/nix/channels-v3/nixpkgs-unstable).

Nix 0.8 has the following improvements:

  • The cryptographic hashes used in store paths are now 160 bits long, but encoded in base-32 so that they are still only 32 characters long (e.g., /nix/store/csw87wag8bqlqk7ipllbwypb14xainap-atk-1.9.0). (This is actually a 160 bit truncation of a SHA-256 hash.)

  • Big cleanups and simplifications of the basic store semantics. The notion of “closure store expressions” is gone (and so is the notion of “successors”); the file system references of a store path are now just stored in the database.

    For instance, given any store path, you can query its closure:

    $ nix-store -qR $(which firefox)
    ... lots of paths ...

    Also, Nix now remembers for each store path the derivation that built it (the “deriver”):

    $ nix-store -qR $(which firefox)
    /nix/store/4b0jx7vq80l9aqcnkszxhymsf1ffa5jd-firefox-1.0.1.drv

    So to see the build-time dependencies, you can do

    $ nix-store -qR $(nix-store -qd $(which firefox))

    or, in a nicer format:

    $ nix-store -q --tree $(nix-store -qd $(which firefox))

    File system references are also stored in reverse. For instance, you can query all paths that directly or indirectly use a certain Glibc:

    $ nix-store -q --referrers-closure \
        /nix/store/8lz9yc6zgmc0vlqmn2ipcpkjlmbi51vv-glibc-2.3.4

  • The concept of fixed-output derivations has been formalised. Previously, functions such as fetchurl in Nixpkgs used a hack (namely, explicitly specifying a store path hash) to prevent changes to, say, the URL of the file from propagating upwards through the dependency graph, causing rebuilds of everything. This can now be done cleanly by specifying the outputHash and outputHashAlgo attributes. Nix itself checks that the content of the output has the specified hash. (This is important for maintaining certain invariants necessary for future work on secure shared stores.)

  • One-click installation :-) It is now possible to install any top-level component in Nixpkgs directly, through the web — see, e.g., http://catamaran.labs.cs.uu.nl/dist/nixpkgs-0.8/. All you have to do is associate /nix/bin/nix-install-package with the MIME type application/nix-package (or the extension .nixpkg), and clicking on a package link will cause it to be installed, with all appropriate dependencies. If you just want to install some specific application, this is easier than subscribing to a channel.

  • nix-store -r PATHS now builds all the derivations PATHS in parallel. Previously it did them sequentially (though exploiting possible parallelism between subderivations). This is nice for build farms.

  • nix-channel has new operations --list and --remove.

  • New ways of installing components into user environments:

    • Copy from another user environment:

      $ nix-env -i --from-profile .../other-profile firefox

    • Install a store derivation directly (bypassing the Nix expression language entirely):

      $ nix-env -i /nix/store/z58v41v21xd3...-aterm-2.3.1.drv

      (This is used to implement nix-install-package, which is therefore immune to evolution in the Nix expression language.)

    • Install an already built store path directly:

      $ nix-env -i /nix/store/hsyj5pbn0d9i...-aterm-2.3.1

    • Install the result of a Nix expression specified as a command-line argument:

      $ nix-env -f .../i686-linux.nix -i -E 'x: x.firefoxWrapper'

      The difference with the normal installation mode is that -E does not use the name attributes of derivations. Therefore, this can be used to disambiguate multiple derivations with the same name.

  • A hash of the contents of a store path is now stored in the database after a succesful build. This allows you to check whether store paths have been tampered with: nix-store --verify --check-contents.

  • Implemented a concurrent garbage collector. It is now always safe to run the garbage collector, even if other Nix operations are happening simultaneously.

    However, there can still be GC races if you use nix-instantiate and nix-store --realise directly to build things. To prevent races, use the --add-root flag of those commands.

  • The garbage collector now finally deletes paths in the right order (i.e., topologically sorted under the “references” relation), thus making it safe to interrupt the collector without risking a store that violates the closure invariant.

  • Likewise, the substitute mechanism now downloads files in the right order, thus preserving the closure invariant at all times.

  • The result of nix-build is now registered as a root of the garbage collector. If the ./result link is deleted, the GC root disappears automatically.

  • The behaviour of the garbage collector can be changed globally by setting options in /nix/etc/nix/nix.conf.

    • gc-keep-derivations specifies whether deriver links should be followed when searching for live paths.

    • gc-keep-outputs specifies whether outputs of derivations should be followed when searching for live paths.

    • env-keep-derivations specifies whether user environments should store the paths of derivations when they are added (thus keeping the derivations alive).

  • New nix-env query flags --drv-path and --out-path.

  • fetchurl allows SHA-1 and SHA-256 in addition to MD5. Just specify the attribute sha1 or sha256 instead of md5.

  • Manual updates.

D.15. Release 0.7 (January 12, 2005)

  • Binary patching. When upgrading components using pre-built binaries (through nix-pull / nix-channel), Nix can automatically download and apply binary patches to already installed components instead of full downloads. Patching is “smart”: if there is a sequence of patches to an installed component, Nix will use it. Patches are currently generated automatically between Nixpkgs (pre-)releases.

  • Simplifications to the substitute mechanism.

  • Nix-pull now stores downloaded manifests in /nix/var/nix/manifests.

  • Metadata on files in the Nix store is canonicalised after builds: the last-modified timestamp is set to 0 (00:00:00 1/1/1970), the mode is set to 0444 or 0555 (readable and possibly executable by all; setuid/setgid bits are dropped), and the group is set to the default. This ensures that the result of a build and an installation through a substitute is the same; and that timestamp dependencies are revealed.

D.16. Release 0.6 (November 14, 2004)

  • Rewrite of the normalisation engine.

    • Multiple builds can now be performed in parallel (option -j).

    • Distributed builds. Nix can now call a shell script to forward builds to Nix installations on remote machines, which may or may not be of the same platform type.

    • Option --fallback allows recovery from broken substitutes.

    • Option --keep-going causes building of other (unaffected) derivations to continue if one failed.

  • Improvements to the garbage collector (i.e., it should actually work now).

  • Setuid Nix installations allow a Nix store to be shared among multiple users.

  • Substitute registration is much faster now.

  • A utility nix-build to build a Nix expression and create a symlink to the result int the current directory; useful for testing Nix derivations.

  • Manual updates.

  • nix-env changes:

    • Derivations for other platforms are filtered out (which can be overriden using --system-filter).

    • --install by default now uninstall previous derivations with the same name.

    • --upgrade allows upgrading to a specific version.

    • New operation --delete-generations to remove profile generations (necessary for effective garbage collection).

    • Nicer output (sorted, columnised).

  • More sensible verbosity levels all around (builder output is now shown always, unless -Q is given).

  • Nix expression language changes:

    • New language construct: with E1; E2 brings all attributes defined in the attribute set E1 in scope in E2.

    • Added a map function.

    • Various new operators (e.g., string concatenation).

  • Expression evaluation is much faster.

  • An Emacs mode for editing Nix expressions (with syntax highlighting and indentation) has been added.

  • Many bug fixes.

D.17. Release 0.5 and earlier

Please refer to the Subversion commit log messages.